[U-Boot] [PATCH 1/2] imx: mx6ul_14x14_evk: Fix SPL boot

[Peng Fan]

When booting SPL on the board, met boot failure:
"
Trying to boot from MMC2
MMC Device 1 not found
spl: could not find mmc device 1. error: -19
SPL: failed to boot from all boot devices
"

Let's register the two mmc controllers in SPL stage to
avoid boot failure.

Signed-off-by: Peng Fan <peng....@nxp.com>
---
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c 
b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index 785247f7e2..af5af4d50a 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -110,7 +110,6 @@ static iomux_v3_cfg_t const uart1_pads[] = {
        MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-#ifndef CONFIG_SPL_BUILD
 static iomux_v3_cfg_t const usdhc1_pads[] = {
        MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
        MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -126,7 +125,6 @@ static iomux_v3_cfg_t const usdhc1_pads[] = {
        /* RST_B */
        MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
-#endif
 
 /*
  * mx6ul_14x14_evk board default supports sd card. If want to use
@@ -237,19 +235,6 @@ int board_mmc_getcd(struct mmc *mmc)
 
 int board_mmc_init(bd_t *bis)
 {
-#ifdef CONFIG_SPL_BUILD
-#if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK)
-       imx_iomux_v3_setup_multiple_pads(usdhc2_emmc_pads,
-                                        ARRAY_SIZE(usdhc2_emmc_pads));
-#else
-       imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
-#endif
-       gpio_direction_output(USDHC2_PWR_GPIO, 0);
-       udelay(500);
-       gpio_direction_output(USDHC2_PWR_GPIO, 1);
-       usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-       return fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
-#else
        int i, ret;
 
        /*
@@ -296,7 +281,6 @@ int board_mmc_init(bd_t *bis)
                                return ret;
                        }
        }
-#endif
        return 0;
 }
 #endif
-- 
2.16.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot