Now that we have a generic FIT generator script for RISC-V, set it as
the default. To also build the FIT image by default, set the default
build target to "u-boot.itb" if CONFIG_SPL_LOAD_FIT is enabled.
Signed-off-by: Lukas Auer <lukas.a...@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng...@gmail.com>
Tested-by: Bin Meng <bmeng...@gmail.com>
---
Changes in v2: None
Kconfig | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Kconfig b/Kconfig
index d2eb744e70..a78dd59a79 100644
--- a/Kconfig
+++ b/Kconfig
@@ -250,7 +250,8 @@ config BUILD_TARGET
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
default "u-boot-elf.srec" if RCAR_GEN3
- default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
+ default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || \
+ ARCH_SUNXI || RISCV)
default "u-boot.kwb" if KIRKWOOD
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
help
@@ -463,6 +464,7 @@ config SPL_FIT_GENERATOR
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT &&
ARCH_ROCKCHIP
+ default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
--
2.21.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
