Hi Joe, On Tue, 23 Jul 2019 at 03:15, Joe Hershberger <joe.hershber...@ni.com> wrote: > > On Thu, Jul 18, 2019 at 4:33 PM Vladimir Oltean <olte...@gmail.com> wrote: > > > > This patchset adds initial support for the NXP LS1021A-TSN board, > > an evaluation platform built in partnership with VVDN/Argonboards > > for some IEEE 802.1 TSN features. > > > > It features a cleaned-up U-Boot board support taken from OpenIL, > > as well as an eTSEC migration to DM_ETH. I picked up Bin Meng's > > patch that converts the LS1021A-TWR (different board, same SoC): > > https://lists.denx.de/pipermail/u-boot/2018-May/330096.html > > verified it on the LS1021A-TSN board I am submitting, and made a > > few adjustments where necessary. > > > > TODO items: > > - Make the eTSEC driver support fixed-link interfaces (necessary > > for the enet2 <-> sja1105 internal port) > > - Add driver for SJA1105 switch > > - Potentially migrate the eTSEC MDIO bus driver to DM_MDIO and > > expose the TBI PHY to mdio commands (useful for debugging), > > once https://lists.denx.de/pipermail/u-boot/2019-June/371563.html > > is merged. > > This series is merged at this point... are you wanting to do that > migration now or do it sometime later? >
I think I would rather have these 9 patches merged first, now that they got reviewed, instead of reworking them again. > > > > Bin Meng (1): > > arm: ls1021atwr: Convert to use driver model TSEC driver > > > > Jianchao Wang (1): > > Add support for the NXP LS1021A-TSN board > > > > Vladimir Oltean (7): > > net: tsec: Refactor the readout of the tbi-handle property > > net: tsec: Fix offset of MDIO registers for DM_ETH > > net: tsec: Reverse Christmas tree notation > > net: tsec: Make errors visible > > net: tsec: Common handling of MAC station address for DM_ETH > > net: tsec: Change compatible strings to match Linux > > configs: ls1021atwr: Fix distro_bootcmd for QSPI boot > > > > arch/arm/Kconfig | 14 + > > arch/arm/cpu/armv7/ls102xa/cpu.c | 2 +- > > arch/arm/cpu/armv7/ls102xa/fdt.c | 10 + > > arch/arm/dts/Makefile | 2 +- > > arch/arm/dts/ls1021a-tsn.dts | 77 ++++++ > > arch/arm/dts/ls1021a-twr.dtsi | 32 +++ > > arch/arm/dts/ls1021a.dtsi | 30 +- > > board/freescale/ls1021atsn/Kconfig | 18 ++ > > board/freescale/ls1021atsn/MAINTAINERS | 8 + > > board/freescale/ls1021atsn/Makefile | 3 + > > board/freescale/ls1021atsn/README.rst | 97 +++++++ > > board/freescale/ls1021atsn/ls1021atsn.c | 260 ++++++++++++++++++ > > board/freescale/ls1021atsn/ls102xa_pbi.cfg | 15 + > > board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg | 8 + > > board/freescale/ls1021atwr/ls1021atwr.c | 38 --- > > configs/ls1021atsn_qspi_defconfig | 79 ++++++ > > configs/ls1021atsn_sdcard_defconfig | 91 ++++++ > > configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 2 + > > configs/ls1021atwr_nor_defconfig | 2 + > > configs/ls1021atwr_nor_lpuart_defconfig | 2 + > > configs/ls1021atwr_qspi_defconfig | 2 + > > ...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 2 + > > configs/ls1021atwr_sdcard_ifc_defconfig | 2 + > > configs/ls1021atwr_sdcard_qspi_defconfig | 2 + > > doc/device-tree-bindings/net/fsl-tsec-phy.txt | 4 +- > > drivers/net/tsec.c | 59 ++-- > > include/configs/ls1021atsn.h | 250 +++++++++++++++++ > > include/configs/ls1021atwr.h | 30 +- > > include/tsec.h | 4 +- > > 29 files changed, 1038 insertions(+), 107 deletions(-) > > create mode 100644 arch/arm/dts/ls1021a-tsn.dts > > create mode 100644 board/freescale/ls1021atsn/Kconfig > > create mode 100644 board/freescale/ls1021atsn/MAINTAINERS > > create mode 100644 board/freescale/ls1021atsn/Makefile > > create mode 100644 board/freescale/ls1021atsn/README.rst > > create mode 100644 board/freescale/ls1021atsn/ls1021atsn.c > > create mode 100644 board/freescale/ls1021atsn/ls102xa_pbi.cfg > > create mode 100644 board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg > > create mode 100644 configs/ls1021atsn_qspi_defconfig > > create mode 100644 configs/ls1021atsn_sdcard_defconfig > > create mode 100644 include/configs/ls1021atsn.h > > > > -- > > 2.17.1 > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > https://lists.denx.de/listinfo/u-boot Regards, -Vladimir _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot