DM_I2C_COMPAT is a compatibility layer that allows using the non-DM
I2C API when DM_I2C is used.When DM_I2C_COMPAT is not enabled for
compilation, a compilation error will be generated. This patch
solves the problem that the i2c-related api of the ls2088a platform
does not support dm.
Signed-off-by: Chuanhua Han <chuanhua....@nxp.com>
---
depends on:
- http://patchwork.ozlabs.org/project/uboot/list/?series=109459
- http://patchwork.ozlabs.org/project/uboot/list/?series=113103
Change in v3:
- Change the Kconfig file to !TFABOOT.
- Define the use of CONFIG_SYS_I2C for non-dm.
- Qualified RDB boards that are not dm are used
CONFIG_SYS_I2C_EARLY_INIT.
Change in v2:
- No change.
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 8 ++++----
board/freescale/ls2080ardb/ls2080ardb.c | 9 +++++++++
include/configs/ls2080a_common.h | 2 ++
include/configs/ls2080ardb.h | 2 ++
4 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index ffda02a..d285565 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -205,10 +205,10 @@ config ARCH_LS2080A
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC_I2C1 if !TFABOOT
+ select SYS_I2C_MXC_I2C2 if !TFABOOT
+ select SYS_I2C_MXC_I2C3 if !TFABOOT
+ select SYS_I2C_MXC_I2C4 if !TFABOOT
imply DISTRO_DEFAULTS
imply PANIC_HANG
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c
b/board/freescale/ls2080ardb/ls2080ardb.c
index ce419df..8833ed3 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -163,7 +163,16 @@ int select_i2c_ch_pca9547(u8 ch)
{
int ret;
+#ifndef CONFIG_DM_I2C
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#else
+ struct udevice *dev;
+
+ ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev);
+ if (!ret)
+ ret = dm_i2c_write(dev, 0, &ch, 1);
+#endif
+
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index c7d8a3b..6be581a 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -75,7 +75,9 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
/* I2C */
+#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
+#endif
/* Serial Port */
#define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index bfb54be..2bf8217 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -13,8 +13,10 @@
#ifdef CONFIG_TARGET_LS2081ARDB
#define CONFIG_QIXIS_I2C_ACCESS
#endif
+#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C_EARLY_INIT
#endif
+#endif
#define I2C_MUX_CH_VOL_MONITOR 0xa
#define I2C_VOL_MONITOR_ADDR 0x38
--
2.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
