This extracts Google Chromebook Samus board specific information from
README.x86, converts plain text documentation to reST format and
adds it to Sphinx TOC tree. No essential content change.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
doc/README.x86 | 97 --------------------------------
doc/board/google/chromebook_samus.rst | 101 ++++++++++++++++++++++++++++++++++
doc/board/google/index.rst | 1 +
3 files changed, 102 insertions(+), 97 deletions(-)
create mode 100644 doc/board/google/chromebook_samus.rst
diff --git a/doc/README.x86 b/doc/README.x86
index a8ad956..2374be9 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -65,103 +65,6 @@ Both tell the Makefile to build u-boot.rom as a target.
---
-Chromebook Samus (2015 Pixel) instructions for bare mode:
-
-First, you need the following binary blobs:
-
-* descriptor.bin - Intel flash descriptor
-* me.bin - Intel Management Engine
-* mrc.bin - Memory Reference Code, which sets up SDRAM
-* refcode.elf - Additional Reference code
-* vga.bin - video ROM, which sets up the display
-
-If you have a samus you can obtain them from your flash, for example, in
-developer mode on the Chromebook (use Ctrl-Alt-F2 to obtain a terminal and
-log in as 'root'):
-
- cd /tmp
- flashrom -w samus.bin
- scp samus.bin username@ip_address:/path/to/somewhere
-
-If not see the coreboot tree [4] where you can use:
-
- bash crosfirmware.sh samus
-
-to get the image. There is also an 'extract_blobs.sh' scripts that you can use
-on the 'coreboot-Google_Samus.*' file to short-circuit some of the below.
-
-Then 'ifdtool -x samus.bin' on your development machine will produce:
-
- flashregion_0_flashdescriptor.bin
- flashregion_1_bios.bin
- flashregion_2_intel_me.bin
-
-Rename flashregion_0_flashdescriptor.bin to descriptor.bin
-Rename flashregion_2_intel_me.bin to me.bin
-You can ignore flashregion_1_bios.bin - it is not used.
-
-To get the rest, use 'cbfstool samus.bin print':
-
-samus.bin: 8192 kB, bootblocksize 2864, romsize 8388608, offset 0x700000
-alignment: 64 bytes, architecture: x86
-
-Name Offset Type Size
-cmos_layout.bin 0x700000 cmos_layout 1164
-pci8086,0406.rom 0x7004c0 optionrom 65536
-spd.bin 0x710500 (unknown) 4096
-cpu_microcode_blob.bin 0x711540 microcode 70720
-fallback/romstage 0x722a00 stage 54210
-fallback/ramstage 0x72fe00 stage 96382
-config 0x7476c0 raw 6075
-fallback/vboot 0x748ec0 stage 15980
-fallback/refcode 0x74cd80 stage 75578
-fallback/payload 0x75f500 payload 62878
-u-boot.dtb 0x76eb00 (unknown) 5318
-(empty) 0x770000 null 196504
-mrc.bin 0x79ffc0 (unknown) 222876
-(empty) 0x7d66c0 null 167320
-
-You can extract what you need:
-
- cbfstool samus.bin extract -n pci8086,0406.rom -f vga.bin
- cbfstool samus.bin extract -n fallback/refcode -f refcode.rmod
- cbfstool samus.bin extract -n mrc.bin -f mrc.bin
- cbfstool samus.bin extract -n fallback/refcode -f refcode.bin -U
-
-Note that the -U flag is only supported by the latest cbfstool. It unpacks
-and decompresses the stage to produce a coreboot rmodule. This is a simple
-representation of an ELF file. You need the patch "Support decoding a stage
-with compression".
-
-Put all 5 files into board/google/chromebook_samus.
-
-Now you can build U-Boot and obtain u-boot.rom:
-
-$ make chromebook_link_defconfig
-$ make all
-
-If you are using em100, then this command will flash write -Boot:
-
- em100 -s -d filename.rom -c W25Q64CV -r
-
-Flash map for samus / broadwell:
-
- fffff800 SYS_X86_START16
- ffff0000 RESET_SEG_START
- fffd8000 TPL_TEXT_BASE
- fffa0000 X86_MRC_ADDR
- fff90000 VGA_BIOS_ADDR
- ffed0000 SYS_TEXT_BASE
- ffea0000 X86_REFCODE_ADDR
- ffe70000 SPL_TEXT_BASE
- ffbf8000 CONFIG_ENV_OFFSET (environemnt offset)
- ffbe0000 rw-mrc-cache (Memory-reference-code cache)
- ffa00000 <spare>
- ff801000 intel-me (address set by descriptor.bin)
- ff800000 intel-descriptor
-
----
-
QEMU x86 target instructions for bare mode:
To build u-boot.rom for QEMU x86 targets, just simply run
diff --git a/doc/board/google/chromebook_samus.rst
b/doc/board/google/chromebook_samus.rst
new file mode 100644
index 0000000..eab1128
--- /dev/null
+++ b/doc/board/google/chromebook_samus.rst
@@ -0,0 +1,101 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Simon Glass <s...@chromium.org>
+
+Chromebook Samus
+================
+
+First, you need the following binary blobs:
+
+ * descriptor.bin - Intel flash descriptor
+ * me.bin - Intel Management Engine
+ * mrc.bin - Memory Reference Code, which sets up SDRAM
+ * refcode.elf - Additional Reference code
+ * vga.bin - video ROM, which sets up the display
+
+If you have a samus you can obtain them from your flash, for example, in
+developer mode on the Chromebook (use Ctrl-Alt-F2 to obtain a terminal and
+log in as 'root')::
+
+ cd /tmp
+ flashrom -w samus.bin
+ scp samus.bin username@ip_address:/path/to/somewhere
+
+If not see the coreboot tree where you can use::
+
+ bash crosfirmware.sh samus
+
+to get the image. There is also an 'extract_blobs.sh' scripts that you can use
+on the 'coreboot-Google_Samus.*' file to short-circuit some of the below.
+
+Then 'ifdtool -x samus.bin' on your development machine will produce::
+
+ flashregion_0_flashdescriptor.bin
+ flashregion_1_bios.bin
+ flashregion_2_intel_me.bin
+
+Rename flashregion_0_flashdescriptor.bin to descriptor.bin
+Rename flashregion_2_intel_me.bin to me.bin
+You can ignore flashregion_1_bios.bin - it is not used.
+
+To get the rest, use 'cbfstool samus.bin print'::
+
+ samus.bin: 8192 kB, bootblocksize 2864, romsize 8388608, offset 0x700000
+ alignment: 64 bytes, architecture: x86
+
+============================ ======== =========== ======
+Name Offset Type Size
+============================ ======== =========== ======
+cmos_layout.bin 0x700000 cmos_layout 1164
+pci8086,0406.rom 0x7004c0 optionrom 65536
+spd.bin 0x710500 (unknown) 4096
+cpu_microcode_blob.bin 0x711540 microcode 70720
+fallback/romstage 0x722a00 stage 54210
+fallback/ramstage 0x72fe00 stage 96382
+config 0x7476c0 raw 6075
+fallback/vboot 0x748ec0 stage 15980
+fallback/refcode 0x74cd80 stage 75578
+fallback/payload 0x75f500 payload 62878
+u-boot.dtb 0x76eb00 (unknown) 5318
+(empty) 0x770000 null 196504
+mrc.bin 0x79ffc0 (unknown) 222876
+(empty) 0x7d66c0 null 167320
+============================ ======== =========== ======
+
+You can extract what you need::
+
+ cbfstool samus.bin extract -n pci8086,0406.rom -f vga.bin
+ cbfstool samus.bin extract -n fallback/refcode -f refcode.rmod
+ cbfstool samus.bin extract -n mrc.bin -f mrc.bin
+ cbfstool samus.bin extract -n fallback/refcode -f refcode.bin -U
+
+Note that the -U flag is only supported by the latest cbfstool. It unpacks
+and decompresses the stage to produce a coreboot rmodule. This is a simple
+representation of an ELF file. You need the patch "Support decoding a stage
+with compression".
+
+Put all 5 files into board/google/chromebook_samus.
+
+Now you can build U-Boot and obtain u-boot.rom::
+
+ $ make chromebook_samus_defconfig
+ $ make all
+
+If you are using em100, then this command will flash write -Boot::
+
+ em100 -s -d filename.rom -c W25Q64CV -r
+
+Flash map for samus / broadwell:
+
+ :fffff800: SYS_X86_START16
+ :ffff0000: RESET_SEG_START
+ :fffd8000: TPL_TEXT_BASE
+ :fffa0000: X86_MRC_ADDR
+ :fff90000: VGA_BIOS_ADDR
+ :ffed0000: SYS_TEXT_BASE
+ :ffea0000: X86_REFCODE_ADDR
+ :ffe70000: SPL_TEXT_BASE
+ :ffbf8000: CONFIG_ENV_OFFSET (environemnt offset)
+ :ffbe0000: rw-mrc-cache (Memory-reference-code cache)
+ :ffa00000: <spare>
+ :ff801000: intel-me (address set by descriptor.bin)
+ :ff800000: intel-descriptor
diff --git a/doc/board/google/index.rst b/doc/board/google/index.rst
index 93833c5..7f557fe 100644
--- a/doc/board/google/index.rst
+++ b/doc/board/google/index.rst
@@ -7,3 +7,4 @@ Google
:maxdepth: 2
chromebook_link
+ chromebook_samus
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
