On 2019/7/16 下午7:57, Jagan Teki wrote:
Configure SLEWP_EN, SLEWN_EN for lpddr4 during phy IO config.
Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: YouMin Chen <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Thanks,
- Kever
---
drivers/ram/rockchip/sdram_rk3399.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/ram/rockchip/sdram_rk3399.c
b/drivers/ram/rockchip/sdram_rk3399.c
index a9e092c39f..c02f936f2a 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -37,6 +37,8 @@
#define PHY_BOOSTP_EN 0x1
#define PHY_BOOSTN_EN 0x1
+#define PHY_SLEWP_EN 0x1
+#define PHY_SLEWN_EN 0x1
#define CRU_SFTRST_DDR_CTRL(ch, n) ((0x1 << (8 + 16 + (ch) * 4)) | \
((n) << (8 + (ch) * 4)))
@@ -334,6 +336,25 @@ static int phy_io_config(const struct chan_info *chan,
clrsetbits_le32(&denali_phy[937], 0xff << 20, reg_value << 20);
/* PHY_939 PHY_PAD_CS_DRIVE */
clrsetbits_le32(&denali_phy[939], 0xff << 20, reg_value << 20);
+
+ /* SLEWP_EN & SLEWN_EN */
+ reg_value = ((PHY_SLEWP_EN << 3) | PHY_SLEWN_EN);
+ /* PHY_924 PHY_PAD_FDBK_DRIVE */
+ clrsetbits_le32(&denali_phy[924], 0x3f << 8, reg_value << 8);
+ /* PHY_926 PHY_PAD_DATA_DRIVE */
+ clrsetbits_le32(&denali_phy[926], 0x3f, reg_value);
+ /* PHY_927 PHY_PAD_DQS_DRIVE */
+ clrsetbits_le32(&denali_phy[927], 0x3f, reg_value);
+ /* PHY_928 PHY_PAD_ADDR_DRIVE */
+ clrsetbits_le32(&denali_phy[928], 0x3f << 8, reg_value << 8);
+ /* PHY_929 PHY_PAD_CLK_DRIVE */
+ clrsetbits_le32(&denali_phy[929], 0x3f << 8, reg_value << 8);
+ /* PHY_935 PHY_PAD_CKE_DRIVE */
+ clrsetbits_le32(&denali_phy[935], 0x3f << 8, reg_value << 8);
+ /* PHY_937 PHY_PAD_RST_DRIVE */
+ clrsetbits_le32(&denali_phy[937], 0x3f << 8, reg_value << 8);
+ /* PHY_939 PHY_PAD_CS_DRIVE */
+ clrsetbits_le32(&denali_phy[939], 0x3f << 8, reg_value << 8);
}
/* speed setting */
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
