Re: [U-Boot] [PATCH v3 13/18] ram: rk3399: debug: Add sdram_print_stride

[Kever Yang]

On 2019/7/16 上午2:28, Jagan Teki wrote:

Add code to print the channel stride, this would help to
print the stride of associated channel.

Here is sample print on LPDDR4, 50MHz.
256B stride

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
Signed-off-by: YouMin Chen <c...@rock-chips.com>

Reviewed-by: Kever Yang <kever.y...@rock-chips.com>

Thanks,
 - Kever

---
  .../include/asm/arch-rockchip/sdram_common.h  |  5 ++++
  drivers/ram/rockchip/sdram_debug.c            | 29 +++++++++++++++++++
  2 files changed, 34 insertions(+)

diff --git a/arch/arm/include/asm/arch-rockchip/sdram_common.h 
b/arch/arm/include/asm/arch-rockchip/sdram_common.h
index cfbb511843..b7549f5d8a 100644
--- a/arch/arm/include/asm/arch-rockchip/sdram_common.h
+++ b/arch/arm/include/asm/arch-rockchip/sdram_common.h
@@ -102,10 +102,15 @@ inline void sdram_print_ddr_info(struct sdram_cap_info 
*cap_info,
                                 struct sdram_base_params *base)
  {
  }
+
+inline void sdram_print_stride(unsigned int stride)
+{
+}
  #else
  void sdram_print_dram_type(unsigned char dramtype);
  void sdram_print_ddr_info(struct sdram_cap_info *cap_info,
                          struct sdram_base_params *base);
+void sdram_print_stride(unsigned int stride);
  #endif /* CONFIG_RAM_ROCKCHIP_DEBUG */

#endif

diff --git a/drivers/ram/rockchip/sdram_debug.c 
b/drivers/ram/rockchip/sdram_debug.c
index 19e9225c12..9cf662675b 100644
--- a/drivers/ram/rockchip/sdram_debug.c
+++ b/drivers/ram/rockchip/sdram_debug.c
@@ -116,3 +116,32 @@ void sdram_print_ddr_info(struct sdram_cap_info *cap_info,
        printdec(cap >> 20);
        printascii("MB\n");
  }
+
+void sdram_print_stride(unsigned int stride)
+{
+       switch (stride) {
+       case 0xc:
+               printf("128B stride\n");
+               break;
+       case 5:
+       case 9:
+       case 0xd:
+       case 0x11:
+       case 0x19:
+               printf("256B stride\n");
+               break;
+       case 0xa:
+       case 0xe:
+       case 0x12:
+               printf("512B stride\n");
+               break;
+       case 0xf:
+               printf("4K stride\n");
+               break;
+       case 0x1f:
+               printf("32MB + 256B stride\n");
+               break;
+       default:
+               printf("no stride\n");
+       }
+}

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot