Hi Bin, On Sat, 13 Jul 2019 at 07:55, Bin Meng <bmeng...@gmail.com> wrote: > > Hi Vladimir, > > On Mon, Jun 24, 2019 at 1:50 AM Vladimir Oltean <olte...@gmail.com> wrote: > > > > By convention, the eTSEC MDIO controller nodes are defined in DT at > > 0x2d24000 and 0x2d50000, but actually U-boot does not touch the > > nits: U-Boot, not U-boot > > > interrupt portion of the register map (MDIO_IEVENTM, MDIO_IMASKM, > > MDIO_EMAPM). > > > > That leaves only the MDIO bus registers (MDIO_MIIMCFG, MDIO_MIIMCOM, > > MDIO_MIIMADD, MDIO_MIIMADD, MDIO_MIIMCON, MDIO_MIIMSTAT) which start at > > the 0x520 offset. > > > > So shift the DT-defined register map by the offset of MDIO_MIIMCFG when > > mapping the MDIO bus registers. > > Could you please create a TSEC MDIO DM driver based on this series > that Alex has done? > > http://patchwork.ozlabs.org/project/uboot/list/?series=111504? >
Yes I actually said in the cover letter that I want to do that, but it has to get merged first :) > > > > Signed-off-by: Vladimir Oltean <olte...@gmail.com> > > --- > > drivers/net/tsec.c | 13 +++++++------ > > include/tsec.h | 4 +++- > > 2 files changed, 10 insertions(+), 7 deletions(-) > > > > Regards, > Bin Thanks, -Vladimir _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
