On Wed, 10 Jul 2019 at 14:58, Igor Opaniuk <igor.opan...@toradex.com> wrote:
>
> + Oleksandr
>
> On Tue, Jun 25, 2019 at 5:07 PM Igor Opaniuk <igor.opan...@toradex.com> wrote:
> >
> > Remove obsolete legacy usbboot wrapper, as distroboot can handle
> > booting from USB drivers.
> >
> > Signed-off-by: Igor Opaniuk <igor.opan...@toradex.com>
> > ---
> >
> > include/configs/apalis-tk1.h | 19 -------------------
> > 1 file changed, 19 deletions(-)
> >
> > diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
> > index b4ddd1bdc6..cead0412cf 100644
> > --- a/include/configs/apalis-tk1.h
> > +++ b/include/configs/apalis-tk1.h
> > @@ -90,23 +90,6 @@
> > "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
> > "sdrootpart=2\0"
> >
> > -#define USB_BOOTCMD \
> > - "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro " \
> > - "rootfstype=ext4 rootwait\0" \
> > - "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
> > - "setenv bootargs ${defargs} ${setupargs} " \
> > - "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
> > - "run usbdtbload; load usb ${usbdev}:${usbbootpart} " \
> > - "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
> > - "bootm ${kernel_addr_r} - ${dtbparam}\0" \
> > - "usbbootpart=1\0" \
> > - "usbdev=0\0" \
> > - "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
> > - "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \
> > - "&& setenv dtbparam ${fdt_addr_r}\0" \
> > - "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
> > - "usbrootpart=2\0"
> > -
> > #define BOARD_EXTRA_ENV_SETTINGS \
> > "boot_file=uImage\0" \
> > "console=ttyS0\0" \
> > @@ -118,7 +101,6 @@
> > "fdt_fixup=;\0" \
> > NFS_BOOTCMD \
> > SD_BOOTCMD \
> > - USB_BOOTCMD \
> > "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
> > "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
> > "flash_eth.img && source ${loadaddr}\0" \
> > @@ -135,7 +117,6 @@
> > "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
> > "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img &&
> > " \
> > "source ${loadaddr}\0" \
> > - USB_BOOTCMD \
> > "vidargs=video=tegrafb0:640x480-16@60 fbcon=map:1\0"
> >
> > /* Increase console I/O buffer size */
> > --
> > 2.17.1
> >
>
>
> --
> Best regards - Freundliche Grüsse - Meilleures salutations
>
> Senior Development Engineer,
> Igor Opaniuk
>
> Toradex AG
> Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 48
> 00 (main line)
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> https://lists.denx.de/listinfo/u-boot
Reviewed-by: Oleksandr Suvorov <oleksandr.suvo...@toradex.com>
--
Best regards
Oleksandr Suvorov
Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
