Converts qemu x86 machines to boot using distro_config. The intent is to allow u-boot in qemu to be maximally compatible with many boot methods without having to change the config. Previously, u-boot would only boot in a very limited set of circumstances where there was a /boot/vmlinuz on scsi 0:3 with no ramdisk.
Signed-off-by: Joshua Watt <jpewhac...@gmail.com> --- configs/qemu-x86_64_defconfig | 1 + configs/qemu-x86_defconfig | 1 + doc/README.x86 | 5 +++++ include/configs/qemu-x86.h | 25 +++++++++++++++++++++++++ 4 files changed, 32 insertions(+) diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index d89cd44144..3e9e83efaf 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -62,3 +62,4 @@ CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_USER=y CONFIG_FRAMEBUFFER_VESA_MODE=0x144 CONFIG_CONSOLE_SCROLL_LINES=5 +CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 898d656ac3..85bb7b1daf 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -50,3 +50,4 @@ CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_USER=y CONFIG_FRAMEBUFFER_VESA_MODE=0x144 CONFIG_CONSOLE_SCROLL_LINES=5 +CONFIG_DISTRO_DEFAULTS=y diff --git a/doc/README.x86 b/doc/README.x86 index 8e0a3f36ed..48557ffa51 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -466,6 +466,11 @@ If you want to check both consoles, use '-serial stdio'. Multicore is also supported by QEMU via '-smp n' where n is the number of cores to instantiate. Note, the maximum supported CPU number in QEMU is 255. +U-Boot uses 'distro_bootcmd' by default when booting on x86 QEMU. This tries to +load a boot script, kernel, and ramdisk from several different interfaces. For +the default boot order, see 'qemu-x86.h'. For more information, see +'README.distro' + The fw_cfg interface in QEMU also provides information about kernel data, initrd, command-line arguments and more. U-Boot supports directly accessing these informtion from fw_cfg interface, which saves the time of loading them diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index 64e7a60b8a..097ed414f8 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -10,8 +10,33 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <linux/sizes.h> + +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(SCSI, scsi, 0) \ + func(VIRTIO, virtio, 0) \ + func(IDE, ide, 0) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> #include <configs/x86-common.h> +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE SZ_256K + +#define CONFIG_PREBOOT "pci enum" + +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_STD_DEVICES_SETTINGS \ + "scriptaddr=0x7000000\0" \ + "kernel_addr_r=0x1000000\0" \ + "ramdisk_addr_r=0x4000000\0" \ + "consoledev=ttyS0\0" \ + CONFIG_OTHBOOTARGS \ + BOOTENV + #define CONFIG_SYS_MONITOR_LEN (1 << 20) #define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd\0" \ -- 2.21.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
