On 25/06/2019 02:42, Alexander von Gluck IV wrote: > Was rebuilding u-boot binary for the Raspberry Pi 2 (from master), and ran > into the following issue: > " > U-Boot 2019.07-rc4-00179-g77f6e2dd05 (Jun 24 2019 - 14:25:14 -0500) > > DRAM: 128 MiB > RPI 2 Model B (0xa21041) > MMC: sdhci@7e300000: 0 > Loading Environment from FAT... *** Warning - bad CRC, using default > environment > > mbox: Header response code invalid > bcm2835: Could not configure display > In: serial > Out: vidconsole > Err: vidconsole > Net: CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] > CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] > CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] > CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] > CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] > CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] > . > . > . > " > > git commit: 77f6e2dd0551d8a825bab391a1bd6b838874bcd4 > Anyone seen this before? > > Thanks!
Can you try to git-bisect between: git bisect good e4afcb2876eeeddd2376c8b07808276b75862498 git bisect bad 3950f0f8563acab248214df36053bb6c57b91940 I suppose that the one I marked as good actually works. :) Regards, Matthias _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot