The generic mux clock code for CCF requires reading the clock multiplexer
value from HW registers. As sandbox by design has readl() as no-op it was
necessary to provide this value in the other way.
The new field in the mux structure (accessible only when sandbox is run)
has been introduced for this purpose.
Signed-off-by: Lukasz Majewski <lu...@denx.de>
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/clk/clk-mux.c | 10 +++++++++-
include/linux/clk-provider.h | 4 ++++
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 14b9f2b1d9..3c075aa09e 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -64,7 +64,12 @@ static u8 clk_mux_get_parent(struct clk *clk)
struct clk_mux *mux = to_clk_mux(clk);
u32 val;
- val = readl(mux->reg) >> mux->shift;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ val = mux->io_mux_val;
+#else
+ val = readl(mux->reg);
+#endif
+ val >>= mux->shift;
val &= mux->mask;
return clk_mux_val_to_index(clk, mux->table, mux->flags, val);
@@ -108,6 +113,9 @@ struct clk *clk_hw_register_mux_table(struct device *dev,
const char *name,
mux->mask = mask;
mux->flags = clk_mux_flags;
mux->table = table;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ mux->io_mux_val = *(u32 *)reg;
+#endif
clk = &mux->clk;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 53c9c41b90..43a25e9c6a 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -59,6 +59,10 @@ struct clk_mux {
*/
const char * const *parent_names;
u8 num_parents;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ u32 io_mux_val;
+#endif
+
};
#define to_clk_mux(_clk) container_of(_clk, struct clk_mux, clk)
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
