arch_cpu_init() initializes the pinmuxing which is called fairly
early in the start sequences, so the board_init function doesn't
need to do it again. This patch removes the call from board_init.
Signed-off-by: Adam Ford <aford...@gmail.com>
diff --git a/board/davinci/da8xxevm/da850evm.c
b/board/davinci/da8xxevm/da850evm.c
index c5404e6063..fb1f5750fa 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -344,10 +344,6 @@ int board_init(void)
DAVINCI_SYSCFG_SUSPSRC_UART2),
&davinci_syscfg_regs->suspsrc);
- /* configure pinmux settings */
- if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
- return 1;
-
#ifdef CONFIG_USE_NOR
/* Set the GPIO direction as output */
clrbits_le32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
