Hi Jagan,
On 06/21/2019 02:55 AM, Jagan Teki wrote:
> u-boot,dm-pre-reloc for uart0, uart2 indeed u-boot specific
> properties. Move them into rk3399-u-boot.dtsi so the boards
> which enabled these node will available during SPL.
>
> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/dts/rk3399-gru.dtsi | 1 -
> arch/arm/dts/rk3399-puma.dtsi | 1 -
> arch/arm/dts/rk3399-u-boot.dtsi | 8 ++++++++
> 3 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi
> index ca0fc391b2..0e2e047180 100644
> --- a/arch/arm/dts/rk3399-gru.dtsi
> +++ b/arch/arm/dts/rk3399-gru.dtsi
> @@ -629,7 +629,6 @@ ap_i2c_audio: &i2c8 {
>
> &uart2 {
> status = "okay";
> - u-boot,dm-pre-reloc;
> };
>
> &usb_host0_ohci {
> diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
> index 897e0bda85..74368da550 100644
> --- a/arch/arm/dts/rk3399-puma.dtsi
> +++ b/arch/arm/dts/rk3399-puma.dtsi
> @@ -639,7 +639,6 @@
> };
>
> &uart0 {
> - u-boot,dm-pre-reloc;
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_xfer &uart0_cts>;
> status = "okay";
> diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
> index 0786c1193a..fcfce9ae02 100644
> --- a/arch/arm/dts/rk3399-u-boot.dtsi
> +++ b/arch/arm/dts/rk3399-u-boot.dtsi
> @@ -10,3 +10,11 @@
> &spi1 {
> u-boot,dm-pre-reloc;
> };
> +
> +&uart0 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&uart2 {
> + u-boot,dm-pre-reloc;
> +};
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
