On Wed, 2019-06-19 at 02:35 +0000, Joel Stanley wrote: > On Tue, 18 Jun 2019 at 01:38, Samuel Mendoza-Jonas <s...@mendozajonas.com> > wrote: > > Add the handling of NC-SI ethernet frames, and add a check at the start > > of net_loop() to configure NC-SI before starting other network commands. > > This also adds an "ncsi" command to manually start NC-SI configuration. > > > > Signed-off-by: Samuel Mendoza-Jonas <s...@mendozajonas.com> > > --- > > v2: Update ncsi command help text > > > > cmd/Kconfig | 8 ++++++++ > > cmd/net.c | 18 ++++++++++++++++++ > > include/net.h | 2 +- > > net/net.c | 27 ++++++++++++++++++++++++++- > > 4 files changed, 53 insertions(+), 2 deletions(-) > > > > diff --git a/cmd/Kconfig b/cmd/Kconfig > > index 0badcb3fe0..9851b04972 100644 > > --- a/cmd/Kconfig > > +++ b/cmd/Kconfig > > @@ -1332,6 +1332,14 @@ config CMD_LINK_LOCAL > > help > > Acquire a network IP address using the link-local protocol > > > > +config CMD_NCSI > > + bool "ncsi" > > + depends on PHY_NCSI > > + help > > + Manually configure the attached NIC via NC-SI. > > + Normally this happens automatically before other network > > + operations. > > Do we need to make it even clearer that "this command not required to use > NCSI"? > > I'm thinking of future me wondering if we should put this in openbmc > builds or not. It would be good to have your advice on this. > > Cheers, > > Joel
Either way; it's definitely not required but might be useful for sanity checking things in BMC bringup. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
