lpddr4 has PLL bypass mode during phy initialization phase,
which does all pll configurations.

So no need to wait explicitly during pctl config.

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
Signed-off-by: YouMin Chen <c...@rock-chips.com>
---
 drivers/ram/rockchip/sdram_rk3399.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/ram/rockchip/sdram_rk3399.c 
b/drivers/ram/rockchip/sdram_rk3399.c
index 3e7261a950..4d2310cbe6 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -570,16 +570,22 @@ static int pctl_cfg(struct dram_info *dram, const struct 
chan_info *chan,
        setbits_le32(&denali_pi[0], START);
        setbits_le32(&denali_ctl[0], START);
 
-       /* Waiting for phy DLL lock */
-       while (1) {
-               tmp = readl(&denali_phy[920]);
-               tmp1 = readl(&denali_phy[921]);
-               tmp2 = readl(&denali_phy[922]);
-               if ((((tmp >> 16) & 0x1) == 0x1) &&
-                   (((tmp1 >> 16) & 0x1) == 0x1) &&
-                   (((tmp1 >> 0) & 0x1) == 0x1) &&
-                   (((tmp2 >> 0) & 0x1) == 0x1))
-                       break;
+       /**
+        * LPDDR4 use PLL bypass mode for init
+        * not need to wait for the PLL to lock
+        */
+       if (params->base.dramtype != LPDDR4) {
+               /* Waiting for phy DLL lock */
+               while (1) {
+                       tmp = readl(&denali_phy[920]);
+                       tmp1 = readl(&denali_phy[921]);
+                       tmp2 = readl(&denali_phy[922]);
+                       if ((((tmp >> 16) & 0x1) == 0x1) &&
+                           (((tmp1 >> 16) & 0x1) == 0x1) &&
+                           (((tmp1 >> 0) & 0x1) == 0x1) &&
+                           (((tmp2 >> 0) & 0x1) == 0x1))
+                               break;
+               }
        }
 
        copy_to_reg(&denali_phy[896], &params_phy[896], (958 - 895) * 4);
-- 
2.18.0.321.gffc6fa0e3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to