Hi, On Mon, Jun 17, 2019 at 10:17 AM Shawn Guo <shawn....@linaro.org> wrote: > > On Sun, Jun 16, 2019 at 07:36:08PM +0200, Andreas Färber wrote: > > Hello, > > > > Am 11.06.19 um 03:31 schrieb Tom Rini: > > > It's release day and here is v2019.07-rc4. At this point, I know we > > > have some regression fixes for i.MX that are coming, and I'm expecting a > > > fix to the build time failure for tinker-rk3288. > > > > > > To repeat myself about DM migration deadlines, first, let me say again, > > > that DM is not required for SPL. This comes up enough that I want to > > > say it again here. Next, if there is active progress on converting > > > things, we'll keep from pulling the code out. This is why for example, > > > we haven't yet pulled out a lot of deprecated SPI code. Some of it is > > > still in progress on being converted, so I need to update the series I > > > posted after the last -rc to remove still less drivers. > > > > I've noticed that Poplar board is regressing with v2019.07-rc4 compared > > to v2019.04. It doesn't even show a U-Boot version banner: > > > > INFO: Boot BL33 from 0x37000000 for 0 Bytes > > NOTICE: BL31: v2.1(debug): > > NOTICE: BL31: Built : 16:00:26, Jun 16 2019 > > INFO: ARM GICv2 driver initialized > > INFO: BL31: Initializing runtime services > > WARNING: BL31: cortex_a53: CPU workaround for 819472 was missing! > > WARNING: BL31: cortex_a53: CPU workaround for 824069 was missing! > > WARNING: BL31: cortex_a53: CPU workaround for 827319 was missing! > > INFO: BL31: cortex_a53: CPU workaround for 855873 was applied > > INFO: BL31: InitINFO: BL31: Preparing for EL3 exit to normal world > > INFO: Entry point address = 0x37000000 > > INFO: SPSR = 0x3c9 > > > > I'm using TF-A v2.1 with the pending eMMC fix from > > https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1230 > > but same issue without that patch. > > > > I don't see any report or fix for this yet - is this related to DM? > > Thanks for reporting, Andreas. I just ran a git bisect which points to > commit below. > > 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver") > > I'm not sure this indicates above commit is problematic or Poplar > platform is buggy on DM support though.
Please increase CONFIG_SYS_MALLOC_F_LEN and have a try. The above commits makes the simple-bus driver available before pre-relocation which requires a little more memory. Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
