New imx8 boards started adding duplicated UART init code. Factor out this to common function sc_pm_setup_uart().
Signed-off-by: Anatolij Gustschin <ag...@denx.de> Cc: Peng Fan <peng....@nxp.com> Cc: Marcel Ziswiler <marcel.ziswi...@toradex.com> Reviewed-by: Peng Fan <peng....@nxp.com> --- Rebased version of patch http://patchwork.ozlabs.org/patch/1111283 to address apalis-imx8/colibri-imx8x boards. arch/arm/include/asm/arch-imx8/sys_proto.h | 2 ++ arch/arm/mach-imx/imx8/Makefile | 2 +- arch/arm/mach-imx/imx8/misc.c | 26 +++++++++++++++++++++ board/freescale/imx8qm_mek/imx8qm_mek.c | 16 +++---------- board/freescale/imx8qxp_mek/imx8qxp_mek.c | 16 +++---------- board/toradex/apalis-imx8/apalis-imx8.c | 17 +++----------- board/toradex/colibri-imx8x/colibri-imx8x.c | 16 +++---------- 7 files changed, 41 insertions(+), 54 deletions(-) create mode 100644 arch/arm/mach-imx/imx8/misc.c diff --git a/arch/arm/include/asm/arch-imx8/sys_proto.h b/arch/arm/include/asm/arch-imx8/sys_proto.h index 73ffaba7d5..3f5bbe9dcc 100644 --- a/arch/arm/include/asm/arch-imx8/sys_proto.h +++ b/arch/arm/include/asm/arch-imx8/sys_proto.h @@ -3,6 +3,7 @@ * Copyright 2018 NXP */ +#include <asm/arch/sci/sci.h> #include <asm/mach-imx/sys_proto.h> #include <linux/types.h> @@ -17,3 +18,4 @@ struct pass_over_info_t { enum boot_device get_boot_device(void); int print_bootinfo(void); +int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate); diff --git a/arch/arm/mach-imx/imx8/Makefile b/arch/arm/mach-imx/imx8/Makefile index 31ad169ccf..92b5c56acb 100644 --- a/arch/arm/mach-imx/imx8/Makefile +++ b/arch/arm/mach-imx/imx8/Makefile @@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += cpu.o iomux.o +obj-y += cpu.o iomux.o misc.o diff --git a/arch/arm/mach-imx/imx8/misc.c b/arch/arm/mach-imx/imx8/misc.c new file mode 100644 index 0000000000..fb92362bbf --- /dev/null +++ b/arch/arm/mach-imx/imx8/misc.c @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <common.h> +#include <asm/arch/sci/sci.h> + +int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate) +{ + sc_pm_clock_rate_t rate = clk_rate; + int ret; + + /* Power up UARTn */ + ret = sc_pm_set_resource_power_mode(-1, uart_rsrc, SC_PM_PW_MODE_ON); + if (ret) + return ret; + + /* Set UARTn clock root to 'rate' MHz */ + ret = sc_pm_set_clock_rate(-1, uart_rsrc, SC_PM_CLK_PER, &rate); + if (ret) + return ret; + + /* Enable UARTn clock root */ + ret = sc_pm_clock_enable(-1, uart_rsrc, SC_PM_CLK_PER, true, false); + if (ret) + return ret; + + return 0; +} diff --git a/board/freescale/imx8qm_mek/imx8qm_mek.c b/board/freescale/imx8qm_mek/imx8qm_mek.c index e69efc4dd6..249c29e0f2 100644 --- a/board/freescale/imx8qm_mek/imx8qm_mek.c +++ b/board/freescale/imx8qm_mek/imx8qm_mek.c @@ -34,21 +34,11 @@ static void setup_iomux_uart(void) int board_early_init_f(void) { + sc_pm_clock_rate_t rate = SC_80MHZ; int ret; - /* Set UART0 clock root to 80 MHz */ - sc_pm_clock_rate_t rate = 80000000; - - /* Power up UART0 */ - ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON); - if (ret) - return ret; - ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate); - if (ret) - return ret; - - /* Enable UART0 clock root */ - ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false); + /* Set UART0 clock root to 80 MHz */ + ret = sc_pm_setup_uart(SC_R_UART_0, rate); if (ret) return ret; diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c index 63cd605b6a..1038f26d69 100644 --- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c +++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c @@ -40,21 +40,11 @@ static void setup_iomux_uart(void) int board_early_init_f(void) { + sc_pm_clock_rate_t rate = SC_80MHZ; int ret; - /* Set UART0 clock root to 80 MHz */ - sc_pm_clock_rate_t rate = 80000000; - - /* Power up UART0 */ - ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON); - if (ret) - return ret; - ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate); - if (ret) - return ret; - - /* Enable UART0 clock root */ - ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false); + /* Set UART0 clock root to 80 MHz */ + ret = sc_pm_setup_uart(SC_R_UART_0, rate); if (ret) return ret; diff --git a/board/toradex/apalis-imx8/apalis-imx8.c b/board/toradex/apalis-imx8/apalis-imx8.c index f516e546a8..4243b0e174 100644 --- a/board/toradex/apalis-imx8/apalis-imx8.c +++ b/board/toradex/apalis-imx8/apalis-imx8.c @@ -37,22 +37,11 @@ static void setup_iomux_uart(void) int board_early_init_f(void) { - sc_pm_clock_rate_t rate; + sc_pm_clock_rate_t rate = SC_80MHZ; sc_err_t err = 0; - /* Power up UART1 */ - err = sc_pm_set_resource_power_mode(-1, SC_R_UART_1, SC_PM_PW_MODE_ON); - if (err != SC_ERR_NONE) - return 0; - - /* Set UART3 clock root to 80 MHz */ - rate = 80000000; - err = sc_pm_set_clock_rate(-1, SC_R_UART_1, SC_PM_CLK_PER, &rate); - if (err != SC_ERR_NONE) - return 0; - - /* Enable UART1 clock root */ - err = sc_pm_clock_enable(-1, SC_R_UART_1, SC_PM_CLK_PER, true, false); + /* Set UART1 clock root to 80 MHz and enable it */ + err = sc_pm_setup_uart(SC_R_UART_1, rate); if (err != SC_ERR_NONE) return 0; diff --git a/board/toradex/colibri-imx8x/colibri-imx8x.c b/board/toradex/colibri-imx8x/colibri-imx8x.c index aa8eaa0ea1..a146148556 100644 --- a/board/toradex/colibri-imx8x/colibri-imx8x.c +++ b/board/toradex/colibri-imx8x/colibri-imx8x.c @@ -51,19 +51,9 @@ int board_early_init_f(void) if (err != SC_ERR_NONE) return 0; - /* Power up UART3 */ - err = sc_pm_set_resource_power_mode(-1, SC_R_UART_3, SC_PM_PW_MODE_ON); - if (err != SC_ERR_NONE) - return 0; - - /* Set UART3 clock root to 80 MHz */ - rate = 80000000; - err = sc_pm_set_clock_rate(-1, SC_R_UART_3, SC_PM_CLK_PER, &rate); - if (err != SC_ERR_NONE) - return 0; - - /* Enable UART3 clock root */ - err = sc_pm_clock_enable(-1, SC_R_UART_3, SC_PM_CLK_PER, true, false); + /* Set UART3 clock root to 80 MHz and enable it */ + rate = SC_80MHZ; + err = sc_pm_setup_uart(SC_R_UART_3, rate); if (err != SC_ERR_NONE) return 0; -- 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
