This patch adds some slave nodes to support the i2c dm on the device
side under the i2c0 controller.

Signed-off-by: Chuanhua Han <chuanhua....@nxp.com>
---
depends on: 
        - http://patchwork.ozlabs.org/project/uboot/list/?series=110856
        - http://patchwork.ozlabs.org/project/uboot/list/?series=109459

 arch/arm/dts/fsl-ls1088a-rdb.dts | 40 ++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1088a-rdb.dts b/arch/arm/dts/fsl-ls1088a-rdb.dts
index 765d1e3d74..c09f79c3c9 100644
--- a/arch/arm/dts/fsl-ls1088a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1088a-rdb.dts
@@ -17,6 +17,46 @@
        };
 };
 
+&i2c0 {
+       status = "okay";
+       u-boot,dm-pre-reloc;
+
+       i2c-mux@77 {
+               compatible = "nxp,pca9547";
+               reg = <0x77>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x2>;
+
+                       ina220@40 {
+                               compatible = "ti,ina220";
+                               reg = <0x40>;
+                               shunt-resistor = <1000>;
+                       };
+               };
+
+               i2c@3 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x3>;
+
+                       temp-sensor@4c {
+                               compatible = "adi,adt7461a";
+                               reg = <0x4c>;
+                       };
+
+                       rtc@51 {
+                               compatible = "pcf2127-rtc";
+                               reg = <0x51>;
+                       };
+               };
+       };
+};
+
 &qspi {
        bus-num = <0>;
        status = "okay";
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to