On 06/06/19 10:59, Shyam Saini wrote: > Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6 > platform with NAND_MXS defined. > > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > Signed-off-by: Shyam Saini <shyam.sa...@amarulasolutions.com> > --- > Hi, > > This patch series is based on feedback gathered from this [1] discussion > and [2] patch submitted by Stefan. > > [1] https://patchwork.ozlabs.org/patch/870467/ > [2] https://patchwork.ozlabs.org/patch/897222/ > > Changes for v4: > - No change > Changes for v3: > - Fixed Typo 'seprate' > Changes for v2: > - New patch > > arch/arm/mach-imx/Kconfig | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index ec09ef240f..5dd286f9a7 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -71,6 +71,17 @@ config CMD_HDMIDETECT > This enables the 'hdmidet' command which detects if an HDMI monitor > is connected. > > +config CMD_NANDBCB > + bool "i.MX6 NAND Boot Control Block(BCB) command" > + depends on NAND && CMD_MTDPARTS > + default y if ARCH_MX6 && NAND_MXS > + help > + Unlike normal 'nand write/erase' commands, this command update > + Boot Control Block(BCB) for i.MX6 platform NAND IP's. > + > + This is similar to kobs-ng, which is used in Linux as separate > + rootfs package. > + > config NXP_BOARD_REVISION > bool "Read NXP board revision from fuses" > depends on ARCH_MX6 || ARCH_MX7 >
Reviewed-by: Stefano Babic <sba...@denx.de> best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
