From: Dalon Westergreen <dalon.westergr...@intel.com> Some architectures, Stratix10, require a hex formatted spl that combines the spl image and dtb. This adds a target to create said hex file with and offset of SPL_TEXT_BASE.
Signed-off-by: Dalon Westergreen <dalon.westergr...@intel.com> --- Changes in v2: -> Move spl hex file generation to SPL Makefile -> Create hexfile from $(SPL_BIN).bin which will include the dtb ifneq(build_dtb,) --- Makefile | 9 ++++----- scripts/Makefile.spl | 8 ++++++++ 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/Makefile b/Makefile index 07106138e9..12e36ebb72 100644 --- a/Makefile +++ b/Makefile @@ -1124,11 +1124,6 @@ OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \ $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \ $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec) -OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex) - -spl/u-boot-spl.hex: spl/u-boot-spl FORCE - $(call if_changed,objcopy) - binary_size_check: u-boot-nodtb.bin FORCE @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \ map_size=$(shell cat u-boot.map | \ @@ -1707,6 +1702,10 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE spl/u-boot-spl.bin: spl/u-boot-spl @: + +spl/u-boot-spl.hex: spl/u-boot-spl + @: + spl/u-boot-spl: tools prepare \ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb) diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 7af6b120b6..419bb6e222 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -216,6 +216,8 @@ ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),) ALL-y += $(obj)/$(SPL_BIN).sfp endif +ALL-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += $(obj)/$(SPL_BIN).hex + ifdef CONFIG_ARCH_SUNXI ALL-y += $(obj)/sunxi-spl.bin @@ -363,6 +365,11 @@ endif $(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE $(call if_changed,mkimage) +OBJCOPYFLAGS_$(SPL_BIN).hex := -I binary -O ihex --change-address=$(CONFIG_SPL_TEXT_BASE) + +$(obj)/$(SPL_BIN).hex: $(obj)/u-boot-spl.bin FORCE + $(call if_changed,objcopy) + quiet_cmd_mksunxiboot = MKSUNXI $@ cmd_mksunxiboot = $(objtree)/tools/mksunxiboot \ --default-dt $(CONFIG_DEFAULT_DEVICE_TREE) $< $@ @@ -463,3 +470,4 @@ ifdef CONFIG_ARCH_K3 tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE $(call if_changed,mkfitimage) endif + -- 2.21.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot