With the spl code correctly returning either MMC1 or MMC2, this board can not boot either from internal eMMC (MMC1) or the uSD card on the baseboard (MMC2) using the device tree.
Signed-off-by: Adam Ford <aford...@gmail.com> diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 0bb2fc6bbf..07cdeb821b 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_MX6LOGICPD=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y @@ -54,12 +55,16 @@ CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),16m(kernel),1m(dtb),-(fs)" CONFIG_CMD_UBI=y +CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd" CONFIG_ENV_IS_IN_FAT=y CONFIG_ENV_IS_IN_NAND=y CONFIG_ENV_FAT_INTERFACE="mmc" CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_OF_TRANSLATE=y CONFIG_PCF8575_GPIO=y CONFIG_LED=y CONFIG_LED_GPIO=y @@ -82,6 +87,7 @@ CONFIG_DM_REGULATOR_GPIO=y CONFIG_MXC_UART=y CONFIG_USB=y CONFIG_DM_USB=y +# CONFIG_SPL_DM_USB is not set CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -- 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
