On Thu, May 23, 2019 at 1:35 PM Fabio Estevam <feste...@gmail.com> wrote: > > Hi Adam, > > On Thu, May 23, 2019 at 3:28 PM Adam Ford <aford...@gmail.com> wrote: > > > I have been following this thread, because I have been working through > > attempting to migrate the imx6q_logic board to SPL_OF_CONTROL which > > requires SPL_DM. > > > > To working around the issue you're describing, I played with disabling > > SPL_DM_USB. With that removed, I can still use nearly all the > > benefits of SPL_DM without losing access to imx_usb_loader. > > See log: > > I took a look at the configs/imx6q_logic_defconfig file and it does > not use FIT support like we do in mx6sabresd. > > If I remove FIT support then imx_usb_loader works fine here too. > > imx6q_logic_defconfig only supports the mx6q variant, whereas sabresd > needs to support mx6q/dl/qp variants , so we use FIT image that > contains therese 3 dtbs. > > So the problem with SDP at the moment is when trying to load a FIT image.
Sorry. I misunderstood the problem. > > Thanks _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot