Hi Prabhakar,
> -----Original Message-----
> From: Prabhakar Kushwaha
> Sent: 2019年5月23日 11:39
> To: Andy Tang <andy.t...@nxp.com>
> Cc: u-boot@lists.denx.de; Andy Tang <andy.t...@nxp.com>
> Subject: RE: [PATCH v2] armv8: ls1028ardb: Add sd and emmc related
> environments
>
>
> > -----Original Message-----
> > From: Yuantian Tang <andy.t...@nxp.com>
> > Sent: Thursday, May 23, 2019 7:46 AM
> > To: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
> > Cc: u-boot@lists.denx.de; Andy Tang <andy.t...@nxp.com>
> > Subject: [PATCH v2] armv8: ls1028ardb: Add sd and emmc related
> environments
> >
> > Add SD, EMMC and xspi environments to faciliate the boot.
> >
> > Signed-off-by: Yuantian Tang <andy.t...@nxp.com>
> > ---
> > v2:
> > - rebase to latest code
> > include/configs/ls1028a_common.h | 24 +++++++++++++++++++++---
> > 1 file changed, 21 insertions(+), 3 deletions(-)
> >
> > diff --git a/include/configs/ls1028a_common.h
> > b/include/configs/ls1028a_common.h
> > index 0db86396e9..9531548184 100644
> > --- a/include/configs/ls1028a_common.h
> > +++ b/include/configs/ls1028a_common.h
> > @@ -127,25 +127,43 @@
> > "${scripthdraddr} ${prefix}${boot_script_hdr} " \
> > "&& esbc_validate ${scripthdraddr};" \
> > "source ${scriptaddr}\0" \
> > - "sd_bootcmd=echo Trying load from SD ..;" \
> > + "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
> > + "sf probe 0:0 && sf read $load_addr " \
> > + "$kernel_start $kernel_size ; env exists secureboot &&" \
> > + "sf read $kernelheader_addr_r $kernelheader_start " \
> > + "$kernelheader_size && esbc_validate ${kernelheader_addr_r};
> > "\
> > + " bootm $load_addr#$board\0" \
> > + "sd_bootcmd=echo Trying load from SD ...;" \
> > "mmcinfo; mmc read $load_addr " \
> > "$kernel_addr_sd $kernel_size_sd && " \
> > "env exists secureboot && mmc read $kernelheader_addr_r " \
> > "$kernelhdr_addr_sd $kernelhdr_size_sd " \
> > " && esbc_validate ${kernelheader_addr_r};" \
> > "bootm $load_addr#$board\0" \
> > + "xspi_hdploadcmd=echo Trying load HDP firmware from
> > FlexSPI...;" \
> > + "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
> > + "&& hdp load $load_addr 0x2000\0" \
> > + "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
> > + "mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
> > + "&& hdp load $load_addr 0x2000\0" \
>
> Hdp support is not part of upstream code -base
>
> So can we remove hdp reference from this patch
Yeah, sure. I have not noticed that.
Thanks,
Andy
>
> --pk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
