On Tue, 2019-05-21 at 20:39 +0530, Sekhar Nori wrote:
> U-Boot README recommends initializing SDRAM in board_init_f(). DA850
> was doing it as part of board_init_r() (through call to
> spl_board_init()
> which calls arch_cpu_init() which calls da850_ddr_setup())
>
> This worked fine till commit 15b8c7505819 ("davinci:
> da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full")
> moved
> BSS to SDRAM.
>
> Functions like mmc_initialize() called in board_init_r() assume BSS
> is
> available. Since SDRAM was not initialized when arch/arm/lib/crt0.S
> tried
> to initialize BSS to 0, BSS is not initialized correctly.
>
> Fix this by simply calling arch_cpu_init() from board_init_f(). Since
> the
> README recommends calling preloader_console_init() from
> spl_board_init(),
> we keep it as-it-is.
>
> Tested using MMC/SD boot on OMAP-L138 LCDK board.
>
> Signed-off-by: Sekhar Nori <nsek...@ti.com>
Tested-by: Peter Howard <phow...@gme.net.au>
> ---
> arch/arm/mach-davinci/spl.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-davinci/spl.c b/arch/arm/mach-
> davinci/spl.c
> index 103639e34757..117b5ee836f8 100644
> --- a/arch/arm/mach-davinci/spl.c
> +++ b/arch/arm/mach-davinci/spl.c
> @@ -33,10 +33,14 @@ void putc(char c)
>
> void spl_board_init(void)
> {
> - arch_cpu_init();
> preloader_console_init();
> }
>
> +void board_init_f(ulong dummy)
> +{
> + arch_cpu_init();
> +}
> +
> u32 spl_boot_device(void)
> {
> switch (davinci_syscfg_regs->bootcfg) {
signature.asc
Description: This is a digitally signed message part
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
