> Subject: Re: Cannot boot mx6qsabred with 2019.07-rc2 > > Hi Peng, > > On Thu, May 16, 2019 at 11:17 PM Peng Fan <peng....@nxp.com> wrote: > > > > Hi Fabio > > > > Booting from SD3, it works for me. See below log. > > > > " > > U-Boot SPL 2019.07-rc2 (May 17 2019 - 10:24:45 +0800) Trying to boot > > from MMC1 > > > > > > U-Boot 2019.07-rc2 (May 17 2019 - 10:24:45 +0800) > > > > CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) > > CPU: Automotive temperature grade (-40C to 125C)Reset cause: POR > > Model: Freescale i.MX6 Quad SABRE Smart Device Board > > Interesting. > > It fails for me and for a customer with the same error log. > > What could explain such difference?
You could enable DEBUG in SPL, and disable SPL_SDP because of size will exceeds. Then see what happends. I have no idea, then. My board is REV C4, chip 1.5 Regards, Peng. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
