From: Markus Klotzbuecher <markus.klotzbuec...@kistler.com>
Move the ubispl configuration to KConfig and drop them from the
whitelist.
Signed-off-by: Markus Klotzbuecher <markus.klotzbuec...@kistler.com>
Cc: Heiko Schocher <h...@denx.de>
Cc: Kyungmin Park <kmp...@infradead.org>
Cc: Javier MartÃnez Canillas <jav...@dowhile0.org>
Cc: Enric Balletbo i Serra <eballe...@gmail.com>
---
Changes for v2: None
common/spl/Kconfig | 79 ++++++++++++++++++++++++++++++++++++
scripts/config_whitelist.txt | 12 ------
2 files changed, 79 insertions(+), 12 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index c7cd34449a..fa63746909 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -556,6 +556,85 @@ config SPL_NAND_SUPPORT
This enables the drivers in drivers/mtd/nand/raw as part of an SPL
build.
+config SPL_UBI
+ bool "Support UBI"
+ help
+ Enable support for loading payloads from UBI. See
+ README.ubispl for more info.
+
+if SPL_UBI
+config SPL_UBI_MAX_VOL_LEBS
+ int "Maximum number of LEBs per volume"
+ depends on SPL_UBI
+ help
+ The maximum number of logical eraseblocks which a static volume
+ to load can contain. Used for sizing the scan data structure.
+
+config SPL_UBI_MAX_PEB_SIZE
+ int "Maximum PEB size"
+ depends on SPL_UBI
+ help
+ The maximum physical erase block size.
+
+config SPL_UBI_MAX_PEBS
+ int "Maximum number of PEBs"
+ depends on SPL_UBI
+ help
+ The maximum physical erase block size. If not overridden by
+ board code, this value will be used as the actual number of PEBs.
+
+config SPL_UBI_PEB_OFFSET
+ int "Offset to first UBI PEB"
+ depends on SPL_UBI
+ help
+ The offset in number of PEBs from the start of flash to the first
+ PEB part of the UBI image.
+
+config SPL_UBI_VID_OFFSET
+ int "Offset to VID header"
+ depends on SPL_UBI
+
+config SPL_UBI_LEB_START
+ int "Offset to LEB in PEB"
+ depends on SPL_UBI
+ help
+ The offset in bytes to the LEB within a PEB.
+
+config SPL_UBI_INFO_ADDR
+ hex "Address to place UBI scan info"
+ depends on SPL_UBI
+ help
+ Address for ubispl to place the scan info. Read README.ubispl to
+ determine the required size
+
+config SPL_UBI_VOL_IDS
+ int "Maximum volume id"
+ depends on SPL_UBI
+ help
+ The maximum volume id which can be loaded. Used for sizing the
+ scan data structure.
+
+config SPL_UBI_LOAD_MONITOR_ID
+ int "id of U-Boot volume"
+ depends on SPL_UBI
+ help
+ The UBI volume id from which to load U-Boot
+
+config SPL_UBI_LOAD_KERNEL_ID
+ int "id of kernel volume"
+ depends on SPL_OS_BOOT && SPL_UBI
+ help
+ The UBI volume id from which to load the kernel
+
+config SPL_UBI_LOAD_ARGS_ID
+ int "id of kernel args volume"
+ depends on SPL_OS_BOOT && SPL_UBI
+ help
+ The UBI volume id from which to load the device tree
+
+
+endif # if SPL_UBI
+
config SPL_NET_SUPPORT
bool "Support networking"
help
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index af7eb73e4a..eeddc6a974 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1871,18 +1871,6 @@ CONFIG_SPL_STACK_ADDR
CONFIG_SPL_STACK_SIZE
CONFIG_SPL_START_S_PATH
CONFIG_SPL_TARGET
-CONFIG_SPL_UBI
-CONFIG_SPL_UBI_INFO_ADDR
-CONFIG_SPL_UBI_LEB_START
-CONFIG_SPL_UBI_LOAD_ARGS_ID
-CONFIG_SPL_UBI_LOAD_KERNEL_ID
-CONFIG_SPL_UBI_LOAD_MONITOR_ID
-CONFIG_SPL_UBI_MAX_PEBS
-CONFIG_SPL_UBI_MAX_PEB_SIZE
-CONFIG_SPL_UBI_MAX_VOL_LEBS
-CONFIG_SPL_UBI_PEB_OFFSET
-CONFIG_SPL_UBI_VID_OFFSET
-CONFIG_SPL_UBI_VOL_IDS
CONFIG_SPL_UBOOT_KEY_HASH
CONFIG_SRAM_BASE
CONFIG_SRAM_SIZE
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
