On Wed, May 15, 2019 at 02:45:19PM +0800, Bin Meng wrote: > On Wed, May 15, 2019 at 1:55 PM AKASHI Takahiro > <takahiro.aka...@linaro.org> wrote: > > > > As of v2019.07-rc1, > > u-boot does fail to boot without any messages on qemu-arm64 when > > configured with qemu_arm64_defconfig plus CONFIG_RSA/RSA_SOFTWARE_EXP. > > (Note that RSA_SOFTWARE_EXP also declares itself with DM_FLAG_PRE_RELOC.) > > > > By bisecting between v2019.04 and v2019.07, I found that the following > > commit triggered this regression: > > > > commit 3a7c45f6a772 > > Author: Lukas Auer <lukas.a...@aisec.fraunhofer.de> > > Date: Wed Apr 10 14:46:07 2019 +0200 > > > > simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver > > > > What's wrong with this? > > I just tested it and it boots for me. > > $ make qemu_arm64_defconfig > $ make menuconfig > adding CONFIG_RSA via "Library routines" -> "Security support" -> "Use > RSA Library" > $ make > > $ qemu-system-aarch64 -machine virt -cpu cortex-a57 -bios u-boot.bin > -nographic
Thank you. I have used locally-built qemu, so I will check the configuration of my build. -Takahiro Akashi > > U-Boot 2019.07-rc1-00506-g90176e3 (May 15 2019 - 14:43:21 +0800) > > DRAM: 128 MiB > Flash: 128 MiB > *** Warning - bad CRC, using default environment > > In: pl011@9000000 > Out: pl011@9000000 > Err: pl011@9000000 > Net: No ethernet found. > Hit any key to stop autoboot: 0 > => > > Regards, > Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
