On 5/9/19 5:57 AM, Chee, Tien Fong wrote:
> On Wed, 2019-05-08 at 14:55 +0200, Marek Vasut wrote:
>> On 5/8/19 12:17 PM, Chee, Tien Fong wrote:
>>>
>>> On Tue, 2019-05-07 at 21:44 +0200, Marek Vasut wrote:
>>>>
>>>> On 5/7/19 9:43 PM, Simon Goldschmidt wrote:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 07.05.19 21:41, Marek Vasut wrote:
>>>>>>
>>>>>>
>>>>>> On 5/7/19 9:36 PM, Simon Goldschmidt wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 07.05.19 21:19, Marek Vasut wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>> According to SoCFPGA Cyclone V datasheet rev.2018.01.26
>>>>>>>> page
>>>>>>>> 175
>>>>>>>> (Chapter 5, FPGA Manager, data register) and Arria10
>>>>>>>> datasheet
>>>>>>>> rev.2017.07.22 page 211 (Chapter 5.4.1.2, FPGA Manager,
>>>>>>>> img_data_w
>>>>>>>> register), the FPGA data register must be written with
>>>>>>>> writes
>>>>>>>> with
>>>>>>>> non-incrementing address.
>>>>>>>>
>>>>>>>> The current code increments the address in 32-byte
>>>>>>>> bursts.
>>>>>>>> Fix the
>>>>>>>> code so it does not increment the address and writes the
>>>>>>>> register
>>>>>>>> repeatedly instead. >
>>>>>>>> Signed-off-by: Marek Vasut <ma...@denx.de>
>>>>>>>> Cc: Chin Liang See <chin.liang....@intel.com>
>>>>>>>> Cc: Dinh Nguyen <dingu...@kernel.org>
>>>>>>>> Cc: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com>
>>>>>>>> Cc: Tien Fong Chee <tien.fong.c...@intel.com>
>>>>>>>> ---
>>>>>>>> drivers/fpga/socfpga.c | 3 +--
>>>>>>>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/fpga/socfpga.c
>>>>>>>> b/drivers/fpga/socfpga.c
>>>>>>>> index 685957626b..6ecea771ce 100644
>>>>>>>> --- a/drivers/fpga/socfpga.c
>>>>>>>> +++ b/drivers/fpga/socfpga.c
>>>>>>>> @@ -55,8 +55,7 @@ void fpgamgr_program_write(const void
>>>>>>>> *rbf_data,
>>>>>>>> size_t rbf_size)
>>>>>>>> " cmp %2, #0\n"
>>>>>>>> " beq 2f\n"
>>>>>>>> "1: ldmia %0!, {r0-r7}\n"
>>>>>>>> - " stmia %1!, {r0-r7}\n"
>>>>>>>> - " sub %1, #32\n"
>>>>>>>> + " stmia %1, {r0-r7}\n"
>>>>>>> Iirc, stmia without the "!" still stores the registers to
>>>>>>> different
>>>>>>> addresses, it just does not change %1 any more if you leave
>>>>>>> away the
>>>>>>> "!"? So this would save on opcode, but not change anything?
>>>>>> Uh oh, you're right. Do we have a bigger problem here then ?
>>>>>> Or
>>>>>> is the
>>>>>> socfpga ignoring the bottom 5 bits of this register address ?
>>>>> Well, bitsream programming works for me very well (we're
>>>>> loading
>>>>> all our
>>>>> FGPAs in U-Boot from a FIT image), so maybe it's the
>>>>> documentation
>>>>> that
>>>>> has a problem?
>>>> That could indeed be, maybe someone on the CC list can take a
>>>> look
>>>> into
>>>> it and crosscheck it with internal docs ?
>>> I can't find any doc mention about "FPGA data must be written in
>>> non-
>>> incremting address", but i saw there is a description about
>>> configuration data is buffered in a 64 deep x 32 bits wide FIFO in
>>> the
>>> FPGA Manager https://www.intel.com/content/dam/www/programmable/us/
>>> en/p
>>> dfs/literature/hb/arria-10/a10_5v4.pdf (pg. 204)
>> Well yes, it's a FIFO, but is the FIFO populated by writing to a
>> single
>> non-incrementing address or are we supposed to write to subsequent
>> incrementing addresses ?
>>
>>>
>>> Based on my understand through this register fpga_mgr_fpgamgrdata
>>> address map (0xFFCFE400-0xFFCFE7FF) on pg. 207 , the 256 bytes of
>>> FIFO
>>> buffer is mapping to above range addresses.
>> 0xFFCFE7FF-0xFFCFE400 = 0x400 = 1024 Bytes , not 256 . Why ?
>
> Finally, i have connected all scattered dot information from few
> internal docs. The register fpga_mgr_fpgamgrdata is actually a space in
> memory, acting like a buffer for the FPGA data. Regardless of the
> programming mode, data input from this buffer is translated into a 32-
> bit wide data path used by the configuration logic.
Does that mean that a write anywhere in 0xFFCFE400..0xFFCFE7FF ends up
in the same register / FIFO ? Does that mean that whole address range
ignores the bottom 0x3ff MSbits ? Does it matter to which address in
that range the CPU writes the data or not ?
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
