Only U-Boot specifc DT properties or overrides, must be in -u-boot.dtsi.
Pinctrl nodes does not belong here. Now that pinctrl nodes are in kernel
DT, there is no reason to be keep these in -u-boot.dtsi. Move them to
proper places so that it would ease copying DT entries from kernel DT.
Signed-off-by: Vignesh R <vigne...@ti.com>
---
arch/arm/dts/k3-am65-main.dtsi | 16 ++++++++++++++
arch/arm/dts/k3-am65-wakeup.dtsi | 8 +++++++
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 23 --------------------
3 files changed, 24 insertions(+), 23 deletions(-)
diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi
index adcd6341e4..f7c2a60d5c 100644
--- a/arch/arm/dts/k3-am65-main.dtsi
+++ b/arch/arm/dts/k3-am65-main.dtsi
@@ -69,4 +69,20 @@
clock-frequency = <48000000>;
current-speed = <115200>;
};
+
+ main_pmx0: pinmux@11c000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x11c000 0x0 0x2e4>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ main_pmx1: pinmux@11c2e8 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x11c2e8 0x0 0x24>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
};
diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
index 1f591ef8bb..1b67747dfe 100644
--- a/arch/arm/dts/k3-am65-wakeup.dtsi
+++ b/arch/arm/dts/k3-am65-wakeup.dtsi
@@ -34,6 +34,14 @@
};
};
+ wkup_pmx0: pinmux@4301c000 {
+ compatible = "pinctrl-single";
+ reg = <0x4301c000 0x118>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
wkup_uart0: serial@42300000 {
compatible = "ti,am654-uart";
reg = <0x42300000 0x100>;
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index f5c8253831..c802f0b2b7 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -19,22 +19,6 @@
&cbass_main{
u-boot,dm-spl;
- main_pmx0: pinmux@11c000 {
- compatible = "pinctrl-single";
- reg = <0x0 0x11c000 0x0 0x2e4>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- main_pmx1: pinmux@11c2e8 {
- compatible = "pinctrl-single";
- reg = <0x0 0x11c2e8 0x0 0x24>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
sdhci0: sdhci@04F80000 {
compatible = "arasan,sdhci-5.1";
reg = <0x0 0x4F80000 0x0 0x1000>,
@@ -57,13 +41,6 @@
&cbass_mcu {
u-boot,dm-spl;
- wkup_pmx0: pinmux@4301c000 {
- compatible = "pinctrl-single";
- reg = <0x0 0x4301c000 0x0 0x118>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
navss_mcu: navss-mcu {
compatible = "simple-bus";
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
