Am 07.05.19 um 13:37 schrieb Simon Goldschmidt:
> On Tue, May 7, 2019 at 9:41 AM Wolfgang Grandegger <w...@aries-embedded.de>
> wrote:
>>
>>
>>
>> Am 06.05.19 um 22:16 schrieb Simon Goldschmidt:
>>> Am 06.05.2019 um 17:45 schrieb Wolfgang Grandegger:
>>>> Re-add support for Aries Embedded MCV SoM, which is CycloneV based
>>>> and the associated MCVEVK baseboard. The board can boot from eMMC.
>>>> Ethernet and USB is supported.
>>>>
>>>> The Aries Embedded boards have been removed with commit 03b54997d568
>>>> ("board/aries: Remove"). I will now take care of them.
>>>>
>>>> Signed-off-by: Wolfgang Grandegger <w...@aries-embedded.de>
>>>> CC: Marek Vasut <ma...@denx.de>
>>>> CC: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com>
>>>> ---
>>>> .travis.yml | 2 +-
>>>> arch/arm/dts/Makefile | 1 +
>>>> arch/arm/dts/socfpga_cyclone5_mcv.dtsi | 22 +
>>>> arch/arm/dts/socfpga_cyclone5_mcvevk-u-boot.dtsi | 38 ++
>>>> arch/arm/dts/socfpga_cyclone5_mcvevk.dts | 81 +++
>>>> arch/arm/mach-socfpga/Kconfig | 7 +
>>>> board/aries/mcvevk/MAINTAINERS | 6 +
>>>> board/aries/mcvevk/Makefile | 7 +
>>>> board/aries/mcvevk/qts/iocsr_config.h | 659
>>>> +++++++++++++++++++++++
>>>> board/aries/mcvevk/qts/pinmux_config.h | 218 ++++++++
>>>> board/aries/mcvevk/qts/pll_config.h | 84 +++
>>>> board/aries/mcvevk/qts/sdram_config.h | 343 ++++++++++++
>>>
>>> These files are always a mystery. Would you be able to provide
>>> (long-lived) link to a simplistic quartus project so that everyone can
>>> regenerate these?
>>>
>>> I'll try to provide such a quartus project for the socrates board, and
>>> I'd be very happy if the original Intel dev boards could do so as well!
>>
>> There is a Quartus example project for that module/board here:
>>
>> https://github.com/ARIES-Embedded/mcv
>
> Cool. And is this a permanent link that we could add to some kind
> of documentation for this board in the U-Boot sources? That would
> ensure U-Boot maintainers can find it in the future...
I will check with the author!
BTW: My patch works fine on top of v2019.04 but the boot hangs without
console output with the latest HEAD. The problems start with commit:
ede6e7b reset: socfpga: add reset handling for old kernels
Then I get:
U-Boot SPL 2019.04-00508-g03b5c7e-dirty (May 07 2019 - 21:03:52 +0200)
### ERROR ### Please RESET the board ###
Any idea how to fix that?
Wolfgang
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
