This comment describes the board state at the moment where we enter the SPL. The description is entirely wrong; re-write it to fit the reality.
Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com> --- arch/arm/cpu/arm926ejs/spear/start.S | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/spear/start.S b/arch/arm/cpu/arm926ejs/spear/start.S index 4395985549..c3bb58c55b 100644 --- a/arch/arm/cpu/arm926ejs/spear/start.S +++ b/arch/arm/cpu/arm926ejs/spear/start.S @@ -21,10 +21,9 @@ * * Startup Code (reset vector) * - * Below are the critical initializations already taken place in BootROM. - * So, these are not taken care in Xloader - * 1. Relocation to RAM - * 2. Initializing stacks + * The BootROM already initialized its own stack in the [0-0xb00] reserved + * range of the SRAM. The SPL (in _main) will update the stack pointer to + * its own SRAM area (right before the gd section). * ************************************************************************* */ -- 2.19.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
