I have commented out the code around MVEBU_GPIO1_BASE. GPIO1 is a software reset button on the board, I might use it later for resetting the board.
GPIO0 is already working. It's currently used to turn on an LED on board initialization. Luka Kovacic (1): arm: mvebu: Add CRS305-1G-4S board arch/arm/dts/Makefile | 3 +- .../dts/armada-xp-crs305-1g-4s-u-boot.dtsi | 13 +++ arch/arm/dts/armada-xp-crs305-1g-4s.dts | 110 ++++++++++++++++++ arch/arm/mach-mvebu/Kconfig | 7 ++ board/mikrotik/crs305-1g-4s/.gitignore | 1 + board/mikrotik/crs305-1g-4s/MAINTAINERS | 7 ++ board/mikrotik/crs305-1g-4s/Makefile | 14 +++ board/mikrotik/crs305-1g-4s/README | 23 ++++ board/mikrotik/crs305-1g-4s/binary.0 | 11 ++ board/mikrotik/crs305-1g-4s/crs305-1g-4s.c | 71 +++++++++++ board/mikrotik/crs305-1g-4s/kwbimage.cfg.in | 12 ++ configs/crs305-1g-4s_defconfig | 52 +++++++++ include/configs/crs305-1g-4s.h | 37 ++++++ 13 files changed, 360 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi create mode 100644 arch/arm/dts/armada-xp-crs305-1g-4s.dts create mode 100644 board/mikrotik/crs305-1g-4s/.gitignore create mode 100644 board/mikrotik/crs305-1g-4s/MAINTAINERS create mode 100644 board/mikrotik/crs305-1g-4s/Makefile create mode 100644 board/mikrotik/crs305-1g-4s/README create mode 100644 board/mikrotik/crs305-1g-4s/binary.0 create mode 100644 board/mikrotik/crs305-1g-4s/crs305-1g-4s.c create mode 100644 board/mikrotik/crs305-1g-4s/kwbimage.cfg.in create mode 100644 configs/crs305-1g-4s_defconfig create mode 100644 include/configs/crs305-1g-4s.h -- 2.20.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
