On Fri, May 03, 2019 at 12:51:24PM +0000, Auer, Lukas wrote:
> On Fri, 2019-05-03 at 09:25 -0300, Fabio Estevam wrote:
> > Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
> > simple-bus driver") causes some i.MX boards that were converted
> > to DM, such as warp7, to fail to boot.
> >
> > As explained by Lukas Auer:
> >
> > "With the patch, U-Boot probes the drivers for devices under simple-bus
> > device tree nodes in the pre-relocation device model. The default value
> > of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with not enough memory to
> > do this, causing it to hang."
> >
> > Fix this problem by providing a convenient default value for
> > CONFIG_SYS_MALLOC_F_LEN.
> >
> > Reported-by: Pierre-Jean Texier <pjtex...@koncepto.io>
> > Suggested-by: Lukas Auer <lukas.a...@aisec.fraunhofer.de>
> > Signed-off-by: Fabio Estevam <feste...@gmail.com>
> > ---
> > arch/arm/mach-imx/Kconfig | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> > index ec09ef240f..a7a7d84b7a 100644
> > --- a/arch/arm/mach-imx/Kconfig
> > +++ b/arch/arm/mach-imx/Kconfig
> > @@ -90,3 +90,6 @@ config DDRMC_VF610_CALIBRATION
> > NXP does NOT recommend to perform this calibration at each boot. One
> > shall perform it on a new PCB and then use those values to program
> > the ddrmc_cr_setting on relevant board file.
> > +
> > +config SYS_MALLOC_F_LEN
> > + default 0x2000
>
> The file arch/arm/mach-imx/Kconfig is unconditionally include, so this
> will set SYS_MALLOC_F_LEN for other boards as well. What I have done
> locally is to include a depends on with all sub-families with DM
> support. If you want you can just use it or I can also submit it as
> well.
>
> config SYS_MALLOC_F_LEN
> default 0x2000
> depends on ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || ARCH_MX7ULP || \
> ARCH_MX6 || ARCH_MX5But really we should do that in ./Kconfig with the other places that have a default value for SYS_MALLOC_F_LEN. And then once we've gotten everyone converted we can try and figure out a perhaps cleaner way to handle these kind of "default per SoC" values. -- Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
