Hi Thirumalai Am 18.05.2010 08:29, schrieb Thirumalai: > Hi Matthias, > I am going to use u-boot alone for my development. Which debugger is > suitable for debugging u-boot and initial board bringup activity? > My choice is BDI2000. Is it ok.
Yes. As I said. But I never used it to debug u-boot together together with GDB. After the serial console was up I used printf-like debugging. And before that point I could live quite good with simple BDI commands. > Also tell me what toolchains need to be used. Is ELDK supports? I don't know. I used a toolchain which I build myself using crosstools-ng (see http://freshmeat.net/projects/crosstool-ng/) > Whether the video driver is available on u-boot ? Check my patch series and you will see ;-) Matthias > -Thirumalai > > ----- Original Message ----- > From: "Matthias Weißer" <weiss...@arcor.de> > To: "Thirumalai" <thirumala...@datapatterns.co.in> > Cc: <u-boot@lists.denx.de> > Sent: Tuesday, May 18, 2010 11:18 AM > Subject: Re: [U-Boot] Support for MB86R01 cpu > > >> Hello Thirumalai >> >> Am 18.05.2010 07:37, schrieb Thirumalai: >>> Hi Matthias, >>> We are using MB86R01 processor in our design. We just want to >>> know >>> what emulator/debugger can be used for initial board bring-up activity >>> and >>> also whether the latest u-boot(2010.03) is supporting this processor ? >> >> I recently posted a patch series adding support for MB86R01 to u-boot. I >> did not receive any comments on V2 so I thinks its more or less fine and I >> hope it will be merged within the upcoming merge window. >> >> See http://lists.denx.de/pipermail/u-boot/2010-May/071097.html for the >> initial mail of the patch series. >> >> I am using a BDI2000 (http://www.abatron.ch/products/bdi-family.html) for >> initial flash programming. A Segger JLink >> (http://www.segger.com/cms/jlink.html) works also. >> >> Hope this helped. >> >> Matthias > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
