From: Bartosz Golaszewski <bgolaszew...@baylibre.com>
The support for DaVinci DM* SoCs has been dropped. The ifdefs in the
musb_hcd driver are no longer needed. Remove them.
Signed-off-by: Bartosz Golaszewski <bgolaszew...@baylibre.com>
---
drivers/usb/musb/musb_hcd.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 2ee0f23b7e..1f2805270a 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -327,9 +327,7 @@ static int ctrlreq_out_data_phase(struct usb_device *dev,
u32 len, void *buffer)
csr = readw(&musbr->txcsr);
csr |= MUSB_CSR0_TXPKTRDY;
-#if !defined(CONFIG_SOC_DM365)
csr |= MUSB_CSR0_H_DIS_PING;
-#endif
writew(csr, &musbr->txcsr);
result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
if (result < 0)
@@ -352,9 +350,7 @@ static int ctrlreq_out_status_phase(struct usb_device *dev)
/* Set the StatusPkt bit */
csr = readw(&musbr->txcsr);
csr |= (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_H_STATUSPKT);
-#if !defined(CONFIG_SOC_DM365)
csr |= MUSB_CSR0_H_DIS_PING;
-#endif
writew(csr, &musbr->txcsr);
/* Wait until TXPKTRDY bit is cleared */
@@ -372,9 +368,7 @@ static int ctrlreq_in_status_phase(struct usb_device *dev)
/* Set the StatusPkt bit and ReqPkt bit */
csr = MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT;
-#if !defined(CONFIG_SOC_DM365)
csr |= MUSB_CSR0_H_DIS_PING;
-#endif
writew(csr, &musbr->txcsr);
result = wait_until_ep0_ready(dev, MUSB_CSR0_H_REQPKT);
--
2.21.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
