This patch reuses some former code for the hawkboard, combines it with some some similar DM_USB compatible code for the OHCI driver, and enables the use of the da850's OHCI controller with DM_USB compatibility.
Signed-off-by: Adam Ford <aford...@gmail.com> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0fbc115801..0d8ab3b651 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -239,6 +239,11 @@ config USB_OHCI_GENERIC ---help--- Enables support for generic OHCI controller. +config USB_OHCI_DA8XX + bool "Support for da850 OHCI USB controller" + help + Enable support for the da850 USB controller. + endif # USB_OHCI_HCD config USB_UHCI_HCD diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 47ad3f34d5..0f38791973 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -4,9 +4,63 @@ */ #include <common.h> - +#include <asm/io.h> +#include <clk.h> +#include <dm.h> +#include <dm/ofnode.h> +#include <generic-phy.h> +#include <reset.h> +#include "ohci.h" #include <asm/arch/da8xx-usb.h> +struct da8xx_ohci { + ohci_t ohci; + struct clk *clocks; /* clock list */ + struct phy phy; + int clock_count; /* number of clock in clock list */ +}; + +static int usb_phy_on(void) +{ + u32 timeout; + u32 cfgchip2; + + cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2); + + cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | + CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ | + CFGCHIP2_USB1PHYCLKMUX); + cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON | + CFGCHIP2_REFFREQ_24MHZ | CFGCHIP2_USB2PHYCLKMUX | + CFGCHIP2_USB1SUSPENDM; + + writel(cfgchip2, &davinci_syscfg_regs->cfgchip2); + + /* wait until the usb phy pll locks */ + timeout = 0x7FFFFFF; + + while (timeout--) { + if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD) + return 1; + } + + /* USB phy was not turned on */ + return 0; +} + +static void usb_phy_off(void) +{ + u32 cfgchip2; + + /* + * Power down the on-chip PHY. + */ + cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2); + cfgchip2 &= ~(CFGCHIP2_PHY_PLLON | CFGCHIP2_USB1SUSPENDM); + cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_RESET; + writel(cfgchip2, &davinci_syscfg_regs->cfgchip2); +} + int usb_cpu_init(void) { /* enable psc for usb2.0 */ @@ -37,3 +91,94 @@ int usb_cpu_init_fail(void) { return usb_cpu_stop(); } + +#if CONFIG_IS_ENABLED(DM_USB) +static int ohci_da8xx_probe(struct udevice *dev) +{ + struct ohci_regs *regs = (struct ohci_regs *)devfdt_get_addr(dev); + struct da8xx_ohci *priv = dev_get_priv(dev); + int i, err, ret, clock_nb; + + err = 0; + priv->clock_count = 0; + clock_nb = dev_count_phandle_with_args(dev, "clocks", "#clock-cells"); + if (clock_nb > 0) { + priv->clocks = devm_kcalloc(dev, clock_nb, sizeof(struct clk), + GFP_KERNEL); + if (!priv->clocks) + return -ENOMEM; + + for (i = 0; i < clock_nb; i++) { + err = clk_get_by_index(dev, i, &priv->clocks[i]); + if (err < 0) + break; + + err = clk_enable(&priv->clocks[i]); + if (err) { + dev_err(dev, "failed to enable clock %d\n", i); + clk_free(&priv->clocks[i]); + goto clk_err; + } + priv->clock_count++; + } + } else if (clock_nb != -ENOENT) { + dev_err(dev, "failed to get clock phandle(%d)\n", clock_nb); + return clock_nb; + } + + err = usb_cpu_init(); + + if (err) + goto clk_err; + + err = ohci_register(dev, regs); + if (err) + goto phy_err; + + return 0; + +phy_err: + ret = usb_cpu_stop(); + if (ret) + dev_err(dev, "failed to shutdown usb phy\n"); + +clk_err: + ret = clk_release_all(priv->clocks, priv->clock_count); + if (ret) + dev_err(dev, "failed to disable all clocks\n"); + + return err; +} + +static int ohci_da8xx_remove(struct udevice *dev) +{ + struct da8xx_ohci *priv = dev_get_priv(dev); + int ret; + + ret = ohci_deregister(dev); + if (ret) + return ret; + + ret = usb_cpu_stop(); + if (ret) + return ret; + + return clk_release_all(priv->clocks, priv->clock_count); +} + +static const struct udevice_id da8xx_ohci_ids[] = { + { .compatible = "ti,da830-ohci" }, + { } +}; + +U_BOOT_DRIVER(ohci_generic) = { + .name = "ohci-da8xx", + .id = UCLASS_USB, + .of_match = da8xx_ohci_ids, + .probe = ohci_da8xx_probe, + .remove = ohci_da8xx_remove, + .ops = &ohci_usb_ops, + .priv_auto_alloc_size = sizeof(struct da8xx_ohci), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; +#endif -- 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot