On Thu, Apr 11, 2019 at 06:52:12AM +0000, Anup Patel wrote: > For 32bit system, the OpenSBI (or BBL) will jump to 0x80400000 address > in S-mode whereas for 64bit system it will jump to 0x80200000 address > in S-mode. > > Currently, the S-mode U-Boot sets SYS_TEXT_BASE to 0x80200000 for both > 32bit and 64bit system. This breaks S-mode U-Boot for 32bit system. > > This patch sets different SYS_TEXT_BASE for 32bit and 64bit system so > that S-mode U-Boot works fine for both. > > Signed-off-by: Anup Patel <anup.pa...@wdc.com> > --- > board/emulation/qemu-riscv/Kconfig | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/board/emulation/qemu-riscv/Kconfig > b/board/emulation/qemu-riscv/Kconfig > index cf057e7de6..20ea6dc59b 100644 > --- a/board/emulation/qemu-riscv/Kconfig > +++ b/board/emulation/qemu-riscv/Kconfig > @@ -14,7 +14,8 @@ config SYS_CONFIG_NAME > > config SYS_TEXT_BASE > default 0x80000000 if !RISCV_SMODE > - default 0x80200000 if RISCV_SMODE > + default 0x80200000 if RISCV_SMODE && ARCH_RV64I > + default 0x80400000 if RISCV_SMODE && ARCH_RV32I > > config BOARD_SPECIFIC_OPTIONS # dummy > def_bool y
Hello Rick, may I kindly ping you regarding this patch (patchwork entry at http://patchwork.ozlabs.org/patch/1083725/)? It would be great if you could commit it soonish as without it the qemu RV32 target is currently non-functional. The patch has received two reviews and a tested-by and doesn't touch any generic code, so it should be safe to apply. Regards, Karsten -- Ich widerspreche hiermit ausdrücklich der Nutzung sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der Werbung sowie der Markt- oder Meinungsforschung. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
