Hi Rick, On Wed, 2019-04-24 at 14:33 +0800, Andes wrote: > From: Rick Chen <r...@andestech.com> > > Add two defconfigs to support AE350 SMP booting from flash. > > Signed-off-by: Rick Chen <r...@andestech.com> > Cc: Greentime Hu <greent...@andestech.com> > --- > configs/ae350_rv32_xip_defconfig | 36 ++++++++++++++++++++++++++++++++++++ > configs/ae350_rv64_xip_defconfig | 37 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 73 insertions(+) > create mode 100644 configs/ae350_rv32_xip_defconfig > create mode 100644 configs/ae350_rv64_xip_defconfig > > diff --git a/configs/ae350_rv32_xip_defconfig > b/configs/ae350_rv32_xip_defconfig > new file mode 100644 > index 0000000..7c46769 > --- /dev/null > +++ b/configs/ae350_rv32_xip_defconfig > @@ -0,0 +1,36 @@ > +CONFIG_RISCV=y > +CONFIG_SYS_TEXT_BASE=0x80000000 > +CONFIG_XIP=y > +CONFIG_TARGET_AX25_AE350=y > +CONFIG_DISTRO_DEFAULTS=y > +CONFIG_NR_DRAM_BANKS=2 > +CONFIG_FIT=y > +CONFIG_BOOTDELAY=3 > +CONFIG_BOARD_EARLY_INIT_F=y > +CONFIG_SYS_PROMPT="RISC-V # " > +CONFIG_CMD_IMLS=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_SF_TEST=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_BOOTP_PREFER_SERVERIP=y > +CONFIG_CMD_CACHE=y > +CONFIG_OF_BOARD=y > +CONFIG_DEFAULT_DEVICE_TREE="ae350_32" > +CONFIG_ENV_IS_IN_SPI_FLASH=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_MMC=y > +CONFIG_FTSDC010=y > +CONFIG_FTSDC010_SDIO=y > +CONFIG_MTD_NOR_FLASH=y > +CONFIG_FLASH_CFI_DRIVER=y > +CONFIG_CFI_FLASH=y > +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y > +CONFIG_SYS_FLASH_CFI=y > +CONFIG_SPI_FLASH=y > +CONFIG_SPI_FLASH_MACRONIX=y > +CONFIG_FTMAC100=y > +CONFIG_BAUDRATE=38400 > +CONFIG_SYS_NS16550=y > +CONFIG_SPI=y > +CONFIG_ATCSPI200_SPI=y > diff --git a/configs/ae350_rv64_xip_defconfig > b/configs/ae350_rv64_xip_defconfig > new file mode 100644 > index 0000000..67633d6 > --- /dev/null > +++ b/configs/ae350_rv64_xip_defconfig > @@ -0,0 +1,37 @@ > +CONFIG_RISCV=y > +CONFIG_SYS_TEXT_BASE=0x80000000 > +CONFIG_XIP=y > +CONFIG_TARGET_AX25_AE350=y > +CONFIG_ARCH_RV64I=y > +CONFIG_DISTRO_DEFAULTS=y > +CONFIG_NR_DRAM_BANKS=2 > +CONFIG_FIT=y > +CONFIG_BOOTDELAY=3 > +CONFIG_BOARD_EARLY_INIT_F=y > +CONFIG_SYS_PROMPT="RISC-V # " > +CONFIG_CMD_IMLS=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_SF_TEST=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_BOOTP_PREFER_SERVERIP=y > +CONFIG_CMD_CACHE=y > +CONFIG_OF_BOARD=y > +CONFIG_DEFAULT_DEVICE_TREE="ae350_64" > +CONFIG_ENV_IS_IN_SPI_FLASH=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_MMC=y > +CONFIG_FTSDC010=y > +CONFIG_FTSDC010_SDIO=y > +CONFIG_MTD_NOR_FLASH=y > +CONFIG_FLASH_CFI_DRIVER=y > +CONFIG_CFI_FLASH=y > +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y > +CONFIG_SYS_FLASH_CFI=y > +CONFIG_SPI_FLASH=y > +CONFIG_SPI_FLASH_MACRONIX=y > +CONFIG_FTMAC100=y > +CONFIG_BAUDRATE=38400 > +CONFIG_SYS_NS16550=y > +CONFIG_SPI=y > +CONFIG_ATCSPI200_SPI=y
The non-xip defconfigs also define CONFIG_SF_DEFAULT_MODE as 0. Is this missing here or not needed in the xip configuration? Looks good otherwise. Reviewed-by: Lukas Auer <lukas.a...@aisec.fraunhofer.de> Thanks, Lukas _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
