> -----Original Message-----
> From: Hiremath, Vaibhav
> Sent: Thursday, May 06, 2010 10:52 PM
> To: u-boot@lists.denx.de
> Cc: w...@denx.de; t...@bumblecow.com; Paulraj, Sandeep; Hiremath, Vaibhav;
> Premi, Sanjeev
> Subject: [PATCH-V3 1/2] omap3: Calculate CS1 size only when SDRC is
> initialized for CS1
>
> From: Vaibhav Hiremath <hvaib...@ti.com>
>
> The patch makes sure that size for SDRC CS1 gets calculated
> only when the CS1 SDRC is initialized.
>
[Hiremath, Vaibhav] Denk,
If we do not have any further comments, can we merge these patches?
Thanks,
Vaibhav
> Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com>
> Signed-off-by: Sanjeev Premi <pr...@ti.com>
> ---
> arch/arm/cpu/arm_cortexa8/omap3/board.c | 7 ++++---
> 1 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/cpu/arm_cortexa8/omap3/board.c
> b/arch/arm/cpu/arm_cortexa8/omap3/board.c
> index 7b78fa4..69a08fd 100644
> --- a/arch/arm/cpu/arm_cortexa8/omap3/board.c
> +++ b/arch/arm/cpu/arm_cortexa8/omap3/board.c
> @@ -282,6 +282,8 @@ int dram_init(void)
> DECLARE_GLOBAL_DATA_PTR;
> unsigned int size0 = 0, size1 = 0;
>
> + size0 = get_sdr_cs_size(CS0);
> +
> /*
> * If a second bank of DDR is attached to CS1 this is
> * where it can be started. Early init code will init
> @@ -290,10 +292,9 @@ int dram_init(void)
> if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) {
> do_sdrc_init(CS1, NOT_EARLY);
> make_cs1_contiguous();
> - }
>
> - size0 = get_sdr_cs_size(CS0);
> - size1 = get_sdr_cs_size(CS1);
> + size1 = get_sdr_cs_size(CS1);
> + }
>
> gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> gd->bd->bi_dram[0].size = size0;
> --
> 1.6.2.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
