On Thu, Feb 21, 2019 at 12:02:07PM -0500, Murali Karicheri wrote: > This patch adds dt node for DP83867 phy used on K2G ICE board and > also enable netcp device nodes for the board. > > EVM hardware spec recommends to add 0.25 nsec delay in the tx > direction and 2.25 nsec delay in the rx direction for internal > delay in the clock path to be on the safer side. > > The board straps RX_DV/RX_CTRL pin of on board DP83867 phy in mode > 1. Unfortunately, the phy data manual disallows this. Add > ti,dp83867-rxctrl-strap-quirk in the phy node to allow software to > enable workaround suggested for this incorrect strap setting. This > ensures proper operation of this PHY. > > The dts bindings are kept in sync with that from 4.14.y linux > kernel. This required the pinmux device related bindings to be > commented out to allow for compilation. > > Signed-off-by: Murali Karicheri <m-kariche...@ti.com> > Acked-by: Joe Hershberger <joe.hershber...@ni.com>
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
