Hi Chris,
On 15.02.19 23:49, Chris Packham wrote:
From: Chris Packham <chris.pack...@alliedtelesis.co.nz>
The DB-XC3-24G4XG is a switch development board from Marvell. It can
either use and external CPU card such as the db-88f6820-amc or the
internal CPU that is integrated into the switch.
Add support for running U-Boot on the internal CPU and enable the USB,
SPI and NAND peripherals. For now this needs the bin_hdr from the
Marvell U-Boot for this board.
Signed-off-by: Chris Packham <judge.pack...@gmail.com>
Compiling this with buildman (Travis) leads to this error:
arm: + db-xc3-24g4xg
+Didn't find the file 'board/Marvell/db-xc3-24g4xg/binary.0' in
'/home/stefan/git/u-boot/.bm-work/00/build' which is mandatory to generate the
image
+This file generally contains the DDR3 training code, and should be extracted
from an existing bootable
+image for your board. See 'kwbimage -x' to extract it from an existing image.
+Could not create image
+make[1]: *** [u-boot.kwb] Error 1
+make[1]: *** Deleting file 'u-boot.kwb'
The external build output directory seems to be the problem here.
Could you please look into this?
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
