On 26/03/2019 11:20, Neil Armstrong wrote: > LibreTech AC is a single board computer manufactured by Libre Technology > with the following specifications: > > - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz > - ARM Mali 450 GPU > - 512MiB DDR4 SDRAM > - 10/100 Ethernet > - HDMI 2.0 4K/60Hz display > - 40-pin GPIO header > - 4 x USB 2.0 Host > - eMMC, SPI NOR Flash > - Infrared receiver > > The u-boot specific code is the same as the P212 support, > so use the P212 board support code with a distinct defconfig > and config include files. > > The patchset inports the DT from Linux 5.0 and add the corresponding > configs and update the MAINTAINERS files. > > Neil Armstrong (2): > ARM: dts: Import libretech-ac DT from Linux 5.0 > boards: Amlogic: Add support for Libretech-AC > > arch/arm/dts/Makefile | 1 + > arch/arm/dts/meson-gxl-s805x-libretech-ac.dts | 248 ++++++++++++++++++ > arch/arm/dts/meson-gxl.dtsi | 70 ++++- > board/amlogic/p212/MAINTAINERS | 1 + > board/amlogic/p212/README.libretech-ac | 103 ++++++++ > configs/libretech-ac_defconfig | 74 ++++++ > include/configs/libretech-ac.h | 24 ++ > 7 files changed, 512 insertions(+), 9 deletions(-) > create mode 100644 arch/arm/dts/meson-gxl-s805x-libretech-ac.dts > create mode 100644 board/amlogic/p212/README.libretech-ac > create mode 100644 configs/libretech-ac_defconfig > create mode 100644 include/configs/libretech-ac.h >
Applied both to u-boot-amlogic Neil _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
