On 09. 04. 19 8:57, Luca Ceresoli wrote: > The Kconfig help has not been updated while adding PCA9547 and PCA9646. > > Signed-off-by: Luca Ceresoli <l...@lucaceresoli.net> > > --- > > Changes v1 -> v2: > - add missing comma (Michal) > - reword and rewrap the sentence > --- > drivers/i2c/muxes/Kconfig | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig > index b0da67ce2c6b..4a601c88b78f 100644 > --- a/drivers/i2c/muxes/Kconfig > +++ b/drivers/i2c/muxes/Kconfig > @@ -29,11 +29,11 @@ config I2C_MUX_PCA954x > tristate "TI PCA954x I2C Mux/switches" > depends on I2C_MUX > help > - If you say yes here you get support for the TI PCA954x > - I2C mux/switch devices. It is x width I2C multiplexer which enables to > - partitioning I2C bus and connect multiple devices with the same > address > - to the same I2C controller where driver handles proper routing to > - target i2c device. PCA9544 and PCA9548 are supported. > + If you say yes here you get support for the TI PCA954x I2C mux/switch > + devices. It is x width I2C multiplexer which enables to partitioning > + I2C bus and connect multiple devices with the same address to the same > + I2C controller where driver handles proper routing to target i2c > + device. Supported chips are PCA9544, PCA9547, PCA9548 and PCA9646. > > config I2C_MUX_GPIO > tristate "GPIO-based I2C multiplexer" >
Acked-by: Michal Simek <michal.si...@xilinx.com> Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
