On May 7, 2010, at 9:12 AM, York Sun wrote: > SPD has minor change from Rev 1.2 to 1.3. This patch enables Rev 1.3. > The difference has ben examined and the code is compatible. > Speed bins is not verified on hardware for CL7 at this moment. > > This patch also enables SPD Rev 1.x where x is up to "F". According to SPD > spec, the lower nibble is optionally used to determine which additinal bytes > or attribute bits have been defined. Software can safely use defaults. > However, > the upper nibble should always be checked. > > Signed-off-by: York Sun <york...@freescale.com> > --- > arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c | 4 ++-- > common/ddr_spd.c | 6 +++++- > 2 files changed, 7 insertions(+), 3 deletions(-)
Wolfgang, I'm intended to pick this up for this release as we are having memories show up that dont work w/u-boot because of this issue on the revision check. - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
