On 2/27/19 8:05 PM, Heinrich Schuchardt wrote: > The SPL for the Tinker Board has to fit into 32 KiB. Currently this limit > is exceeded. > > CONFIG_SPL_I2C_SUPPORT is not needed to move to main U-Boot. So let's > disable it. > > Suggested-by: David Wu <david...@rock-chips.com> > Signed-off-by: Heinrich Schuchardt <xypron.g...@gmx.de>
Hello Philipp, the patch has been assigned to you in patchwork. Is there any reason not to merge it into U-Boot v2019.04? Best regards Heinrich > --- > This solves only one of the problems with the boards in v2019.04. > The next problem is that reading the environment from MMC fails. > > The patch > [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB > https://lists.denx.de/pipermail/u-boot/2019-February/358883.html > makes the problem visibe. > --- > configs/tinker-rk3288_defconfig | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig > index 68adf7635bf..03a7f81d63d 100644 > --- a/configs/tinker-rk3288_defconfig > +++ b/configs/tinker-rk3288_defconfig > @@ -18,7 +18,6 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb" > CONFIG_DISPLAY_BOARDINFO_LATE=y > CONFIG_SPL_STACK_R=y > CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 > -CONFIG_SPL_I2C_SUPPORT=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_GPT=y > CONFIG_CMD_I2C=y > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
