Hi Fabio, On 30/03/19 21:59, Fabio Estevam wrote: > Hi Stefano, > > On Thu, Mar 21, 2019 at 10:59 AM Fabio Estevam <feste...@gmail.com> wrote: >> >> After the DM_MMC conversion the following eMMC boot error is observed: >> >> U-Boot SPL 2019.04-rc4 (Mar 20 2019 - 18:53:28 +0000) >> Trying to boot from MMC1 >> MMC Device 0 not found >> spl: could not find mmc device 0. error: -19 >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### >> >> This happens because the SPL code does not initialize the SDHC pins >> and clock. >> >> Fix it by moving the original eMMC initialization from U-Boot proper >> to SPL. >> >> Reported-by: Otavio Salvador <ota...@ossystems.com.br> >> Signed-off-by: Fabio Estevam <feste...@gmail.com> >> Tested-by: Fabio Berton <fabio.ber...@ossystems.com.br> >> Reviewed-by: Otavio Salvador <ota...@ossystems.com.br> > > Could you please consider this one for 2019.04? > > It is needed to fix a boot regression after DM conversion. > > Thanks >
I picked up this and other fixes for the release - when Travis has finished, I will send PR to Tom. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
