Reviewed-by: Igor Opaniuk <igor.opan...@toradex.com>
On Fri, Mar 29, 2019 at 12:25 AM Marcel Ziswiler <mar...@ziswiler.com> wrote: > > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > The implicit fallback mechanism for searching the whole MDIO bus for at > least one PHY has been gone with the following commit b882005a18de > ("drivers/net/fec: phy_init: remove redundant logic"). This lead to the > Ethernet driver erroring out as follows: > > Net: Could not get PHY for FEC0: addr -19 > eth-1: fec@400d1000 > Colibri VFxx # dhcp > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > No ethernet found. > Could not get PHY for FEC0: addr -19 > Colibri VFxx # > > This commit adds an explicit PHY node which makes it work again. > > Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > --- > > arch/arm/dts/vf-colibri.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi > index 5ce17076e9..91ca4e4ddd 100644 > --- a/arch/arm/dts/vf-colibri.dtsi > +++ b/arch/arm/dts/vf-colibri.dtsi > @@ -60,11 +60,24 @@ > status = "okay"; > }; > > +/* Ethernet */ > &fec1 { > phy-mode = "rmii"; > + phy-handle = <ðphy1>; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_fec1>; > status = "okay"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy1: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + max-speed = <100>; > + reg = <1>; > + }; > + }; > }; > > &i2c0 { > -- > 2.20.1 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot