Dear Hari Babu, In message <q2re05b45b91005052125p8b8538eehd8d07687081ad...@mail.gmail.com> you wrote: > > I am having a new NIC card and i have to develop U-boot Loader for that.Can > any one help me which board name in U-Boot source code having similar kind > of features( PHY, MAC ) for cloning that to my new NIC target card.This NIC > card is communicating through PCIe to host,my NIC card is having the > following H/W details. > > 1.CN63xx processor(Cavium network) > 2.NAND Flash device : MT29F16G08ABABA > 3.NOR Flash device : JS28F320J3D75 > 4.EEPROM : AT24C256B, AT25F1024 > 5.PSRAM : MT45W1MW16PD > 6.DDR3SDRAM :MT41J128M16 > 7.*BCM8727* dual 10 GbE SFI-to-XAUI PHY > > I think U-bootloader dont have Cavium support processors.so can u consider > other H/W details for finding board name. Thank u.
Cavium has ported U-Boot to their boards, but never contributed any of their work back into the mainline tree. It is probably most efficient to get the source code for their ports and use this as a base. Since you use Cavium processors, it should be no problem for you to get their sources. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de When a man sits with a pretty girl for an hour, it seems like a minute. But let him sit on a hot stove for a minute -- and it's lon- ger than any hour. That's relativity. -- Albert Einstein _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
