Dear Wolfgang,
Sorry to post the 64 encode message by mail box jxnu...@163.com, now I just
convert it into plain text and re-send it, could you guys have a look at this
quick question?
BTW could you pls tell me how to join to mail list: u-b...@lists.denx.de?
Thanks again.
Denny
---------------------------------------------------------------------------------------------------------
Hi all,
I tried to boot kernel fom flash by automatically, but encounter the 'hang'
problem while transfer the control to kernel ....
now each time I have to enter 3, and run 'bootm 0xfb400000', have you even
encounter similar problem? does it relate with env?
Log:
=> printenv
AutoLoad=yes
baudrate=9600
bootargs=ip=off console=ttyS1,9600 noinitrd rootfstype=jffs2
root=/dev/mtdblock1 rw
bootcmd=setenv bootargs mem=${mem} ${OSLoadOptions};bootm 0xfb400000
bootdelay=4
eth1addr=00:E0:0C:00:01:FD
eth2addr=00:E0:0C:00:02:FD
ethact=ENET0
ethaddr=00:E0:0C:00:00:FD
gatewayip=192.168.65.1
initrd_high=0x20000000
ipaddr=192.168.65.233
loadaddr=200000
loads_echo=1
mem=520192k
netmask=255.255.255.0
serverip=192.168.65.21
stderr=serial
stdin=serial
stdout=serial
Environment size: 475/4080 bytes
=> reset
U-Boot 1.1.3 (Apr 25 2010 - 18:01:57)
CPU: 8544_E, Version: 1.1, (0x803c0111)
Core: E500, Version: 2.2, (0x80210022)
Clock Configuration:
CPU: 800 MHz, CCB: 400 MHz,
DDR: 200 MHz, LBC: 50 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: CHOW48
CPU Board Revision 0.0 (0x0000)
PCI2: disabled
I2C: ready
DRAM: Initializing DDRSDRAM
memsize = 200
DDR: 512 MB
POST RAM test disabled.
Now running in RAM - U-Boot at: 1fb7f000
trap_init : 0x0
system inventory subsystem initialized
FLASH: 64 MB
L2 cache 256KB: enabled
PCI:
01 00 11ab db90 0580 00
0a 00 11ab db90 0580 00
In: serial
Out: serial
Err: serial
Net:
ENET0: PHY is Marvell 88E1112 (1410c97)
set_bootstatus: BS_LOAD_OS, platform_idx = 11
Hit ESC to stop autoboot: 0
## Booting image at fb400000 ...
Image Name: Linux-2.6.14.2
Image Type: PowerPC Linux Multi-File Image (gzip compressed)
Data Size: 2506367 Bytes = 2.4 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 1429849 Bytes = 1.4 MB
Image 1: 1076503 Bytes = 1 MB
Uncompressing Multi-File Image ... ## Current stack ends at 0x1FB5DBD0 =>
set upper limit to 0x00800000
## initrd at 0xFB55D1A8 ... 0xFB663EBE (len=1076503=0x106D17)
Loading Ramdisk to 1fa56000, end 1fb5cd17 ... OK
initrd_start = 1fa56000, initrd_end = 1fb5cd17
## Transferring control to Linux (at address 00000000) ...
Thanks,
Denny
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
